Does anyone have a copy of P2K SW9 manual? If so, can you send me a link or an electronic copy? I would like to review the diagrams and make a decision on parts needed to convert from DC to Rail Pro digital control.
Has anyone done this conversion (Rail pro with 9 pin connector or other system)? Any tips?
Thanks
This says SW-8 / 900 / 600 hope that's the one you're looking for.
L-L_SW by Edmund, on Flickr
L-L_SW_0001 by Edmund, on Flickr
L-L_SW_0002 by Edmund, on Flickr
L-L_SW_0003 by Edmund, on Flickr
L-L_SW_0004 by Edmund, on Flickr
L-L_SW_0005 by Edmund, on Flickr
L-L_SW_0006 by Edmund, on Flickr
L-L_SW_0007 by Edmund, on Flickr
There are photos of the older run SW-8/ 9/ 1200/ 900/ 600 here:
http://tcsdcc.com/installation/ho-scale/life-sw891200/m1
Hope that helps —
Cheers, Ed
Thanks Ed! I believe you are correct that the SW8 and SW9 were electrically similar. Both have a circuit board and the drop in decoder from NCE is the same one for both switchers. Also, the circuit board appears to be same shape as the NCE drop-in decoder. Based on this drawing, it looks like I need to remove the circuit board and directly solder the appropriate wires to the Rail Pro decoder. That's my guess...
Thanks again!
Rick
Send an email to Walthers. They should be able to send you a PDF via return email. They've done that for me.
It takes an iron man to play with a toy iron horse.
Yes, this is a hardwire installation for anything beyond DC. There's very little room to work with. Disconnect the wires and discard (well, put in the spare parts box - none of us ever actually throws anything out, right?) the board.
--Randy
Modeling the Reading Railroad in the 1950's
Visit my web site at www.readingeastpenn.com for construction updates, DCC Info, and more.