Trains.com

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

Static Electricity in Carpeted Layout Room

1786 views
9 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    January 2013
  • 5 posts
Static Electricity in Carpeted Layout Room
Posted by TheO&R on Friday, February 19, 2016 9:55 PM

My basement layout is nicely carpeted and don't intend to rip it up.  Anyone have any solutions to reduce or eliminate the static?  I touched the LCD screen on one of my throttles with my finger and zapped it to an illegible state.

Tags: static
  • Member since
    January 2010
  • From: Chi-Town
  • 7,712 posts
Posted by zstripe on Monday, February 22, 2016 7:05 PM

You can use an anti-static spray on Your carpeting....that usually works:

http://www.amazon.com/AntiStatic-Liquid-32-ACL-Staticide/dp/B002WWNLVO

Take Care! Big Smile

Frank

  • Member since
    January 2009
  • From: Bakersfield, CA 93308
  • 6,526 posts
Posted by RR_Mel on Monday, February 22, 2016 8:15 PM

Dawn Dishwashing Spray diluted 2:1 with water works great.
 
 
 
Mel
 
Modeling the early to mid 1950s SP in HO scale since 1951
 
My Model Railroad   
 
Bakersfield, California
 
I'm beginning to realize that aging is not for wimps.
  • Member since
    February 2007
  • From: Shenandoah Valley The Home Of Patsy Cline
  • 1,842 posts
Posted by superbe on Monday, February 22, 2016 8:22 PM

Check the humidity in the room. It may be desert like and need a humidifier.

Bob

  • Member since
    May 2004
  • 7,500 posts
Posted by 7j43k on Monday, February 22, 2016 8:50 PM

I'll agree with Bob.  I doubt you'll have a problem if you keep your humidity between 40% and 60%.  And it should make your benchwork happier.

 

 

Ed

  • Member since
    January 2015
  • From: Southern California
  • 1,682 posts
Posted by Lone Wolf and Santa Fe on Tuesday, February 23, 2016 2:07 PM

Here in the desert sometimes when the wind blows it is so dry and static is so high you can get shocked when you touch anything conductive, even water running in the sink, or the metal corner of a wall even though it is covered with paint and joint compound.

The metal screws on light switch covers are grounded. I touch those often to get the static off of my body and clothes. I try to do it before I touch anything electronic. I also had to cover the screws on my walk around throttle with tape so they wouldn’t be conductive.

J………….

Modeling a fictional version of California set in the 1990s Lone Wolf and Santa Fe Railroad
  • Member since
    March 2011
  • From: Westford MA
  • 543 posts
Posted by Tophias on Thursday, February 25, 2016 10:23 AM

I do something similar.  Whenever I walk around the layout or before I adjust the stereo receiver or iPod I touch one of the metal lally columns.  Works very well to discharge me. 

  • Member since
    July 2006
  • From: 4610 Metre's North of the Fortyninth on the left coast of Canada
  • 9,352 posts
Posted by BATMAN on Thursday, February 25, 2016 10:33 AM

Touching a wet dog nose also works well.Smile, Wink & Grin

Brent

"All of the world's problems are the result of the difference between how we think and how the world works."

  • Member since
    July 2006
  • From: Pittsburgh, PA
  • 1,796 posts
Posted by JoeinPA on Thursday, February 25, 2016 12:02 PM

In my layout area I have rubber foam type mats that go together like a jigsaw puzzle and walking on them generates a lot of static electricity. I've found that spraying the surface of the mats with anti-static clothes spray kills the static for a good while and the room smells pleasant too.

Joe 

  • Member since
    November 2006
  • From: NW Pa Snow-belt.
  • 2,216 posts
Posted by ricktrains4824 on Thursday, February 25, 2016 10:20 PM

Humidifier. Dry air create more static electricity issues. 

Dry air also causes just as many issues as too moist air, too little moisture creates issues, in addition to increasing static, as too dry or too moist air will cause warping of materials. (This includes bench work, wood buildings, and other issues.) This can lead to other not so welcome concerns.

Add humidity during winter, remove it during summer, in most places.

It also helps with breathing issues caused by things like asthma, as too humid or too dry will cause more frequent flare-ups. (Another reason for me to control humidity in my home, but admittedly a non-issue for many people.)

Ricky W.

HO scale Proto-freelancer.

My Railroad rules:

1: It's my railroad, my rules.

2: It's for having fun and enjoyment.

3: Any objections, consult above rules.

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

Users Online

There are no community member online

Search the Community

ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT
Model Railroader Newsletter See all
Sign up for our FREE e-newsletter and get model railroad news in your inbox!