Hello All,
For a simple 2-function output, non-sound, decoder I recommend the Digitrax DH126PS.
If you need more function outputs there is the 6-function, non-sound, DH166PS decoder.
Both have a factory installed 9-pin NMRA plug for ease of installation.
If you need longer wire harnesses check out the DH126P or DH166P; 2- or 6-function decoders.
Both are feature packed at a reasonable price. Check out eBay for the best prices.
Hope this helps.
"Uhh...I didn’t know it was 'impossible' I just made it work...sorry"
wcu boyI looked at TCS's web site for a sound decoder; however, I was confused a little. The engine is a GP38, but the installation files did not allude to it being a plug and play installation. One GP38 installation was a hardwire, non-DCC ready while the other installation was a board replacement.
Look farther down on the list, the installation may be similar to the silver series GP40s.
Is your locomotive listed here: http://www.atlasrr.com/holoco/hogp38406.htm?
You should probably remove the shell to check for space for a speaker. (not sure where they go on the gold series).
The WOW 101 Diesel decoder with a T-series harness would be 1 option. Another TCS option would be the product listed on the TCS home page. Its made to replace the entire board (AK-MB1 w/WOW 121).
The ESU LokPilot is an excellent non-sound decoder with motor control second to none. If you are after a sound decoder again ESU is your source with LokSound decoders with many sound options.
All the best.
Reinhard
Joe F
All the decoder companies show the decoder pictures, sizes also.
Since you did not mention sound, assuming non sound.
Rich
If you ever fall over in public, pick yourself up and say “sorry it’s been a while since I inhabited a body.” And just walk away.
If it has an 8 pin socket for a decoder, then the answer is, any decoder with an 8 pin plug.
I have been using TCS for all my non-sound locos. The ESU Lokpilot would be another good option for top notch motor control. Since I have been using only Loksound for sound, I may switch to Lokpilot for all my non-sound.
--Randy
Modeling the Reading Railroad in the 1950's
Visit my web site at www.readingeastpenn.com for construction updates, DCC Info, and more.
If you are wanting to install sound - even if the sound decoder is PNP, the speaker install will be a little more involved. I would try contacting TCS directly and getting their recommendation. For sound, Loksound would be another excellent choice of brand.
Tom
https://tstage9.wixsite.com/nyc-modeling
Time...It marches on...without ever turning around to see if anyone is even keeping in step.
Plug in a DZ126PS decoder. Does not get much simpler.
I have used the DZ125 which the 126 replaced.
http://www.digitrax.com/products/mobile-decoders/dz126ps/
Thank you both for your quick responses. I looked at TCS's web site for a sound decoder; however, I was confused a little. The engine is a GP38, but the installation files did not allude to it being a plug and play installation. One GP38 installation was a hardwire, non-DCC ready while the other installation was a board replacement. I would like a simple plug-and-play application. It is interesting to me that Atlas's MP-15DC silver series engines are a simple plug and play. I would appreciate some wisdom about finding a plug and play sound decoder for this Atlas GP38 high nose late version master silver series engine. I appreciate any and all thoughts.
I'm assuming you are just looking for a non-sound decoder? I would chose one from either TCS or Lenz. Both offer excellent BEMF and a variety of connectors for PNP. I have a Lenz Silver MP in my older Walthers SW1 switcher and that puppy will do 0.33sMPH on speed step 001.
Modeling BNSF and Milwaukee Road in SW Wisconsin
I own an Atlas GP38 High Nose Late Version Master Silver Series Locomotive. According to the Atlas web site, this engine is decoder-ready with a NMRA 8-pin plug for DCC. I prefer a plug-and-play decoder.
Any suggestions from those who are more experienced in these matters? I would appreciate any help.