Trains.com

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

What Will Clean the Threads on Container of Rosin Soldering Flux

1765 views
6 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    January 2010
  • 2,616 posts
What Will Clean the Threads on Container of Rosin Soldering Flux
Posted by peahrens on Wednesday, January 21, 2015 5:03 PM

I have some Radio Shack rosin soldering flux in a 2 oz plastic container with threaded top.  It would last me three lifetimes but is getting to where the residue on the threads is drying out and seizing up and I soon will break the plastic forcing it off.  I tried alcohol to clean it up and that didn't seem to work.  What will??

Thank you.

Paul

Modeling HO with a transition era UP bent

  • Member since
    July 2003
  • From: Sierra Vista, Arizona
  • 13,757 posts
Posted by cacole on Wednesday, January 21, 2015 5:26 PM

Try some lacquer thinner if you have it available.  I have some resin flux in a plastic (nylon?)  bottle with a long, metal spout.  My problem has been the spout clogging up if it sits too long unused.  The opening in the spout is smaller than what a sewing pin will go into.

 

  • Member since
    February 2002
  • From: Reading, PA
  • 30,002 posts
Posted by rrinker on Wednesday, January 21, 2015 5:31 PM

 That might work. Just be careful with the palstic bottle. The flux I have is SolderSafe brand, it's water soluable, so it washes off with just water. Silly me, I bought a jar of paste and a jar of liquid - I never use the liquid, and all the liquid is is the paste with some added distilled water. However, at the rate I seem to be using it, the jar of paste will last me a long long time.

                    --Randy

 


Modeling the Reading Railroad in the 1950's

 

Visit my web site at www.readingeastpenn.com for construction updates, DCC Info, and more.

  • Member since
    January 2007
  • From: Eastern Shore Virginia
  • 3,290 posts
Posted by gandydancer19 on Thursday, January 22, 2015 12:14 PM

70% alcohol (blue label) won't touch it.  The 91% alcohol (red label) will work.  That is all I use to clean up rosin flux from circuit boards, track feeders, and other soldering projects.

Elmer.

The above is my opinion, from an active and experienced Model Railroader in N scale and HO since 1961.

(Modeling Freelance, Eastern US, HO scale, in 1962, with NCE DCC for locomotive control and a stand alone LocoNet for block detection and signals.) http://waynes-trains.com/ at home, and N scale at the Club.

  • Member since
    January 2010
  • 2,616 posts
Posted by peahrens on Thursday, January 22, 2015 12:19 PM

Thanks, I'll try those.

Paul

Modeling HO with a transition era UP bent

  • Member since
    July 2006
  • From: North Dakota
  • 9,592 posts
Posted by BroadwayLion on Friday, January 23, 2015 7:00 AM

LION likes not Radio Shack Flux. Him used to the tin of Nokorode flux. Left that open for years with no problem, RS dried out so quickly that I have to keep it closed. [PITA] LION needs two paws to open it, needs surgical gloves to protect nice furry paws of him, uses a scrap of wood (think match stick) to transfer a small amount. Is still a big mess to handle.

At the moment there is a cat at my window. She says "meow" to all of you, and if she thinks she is going to get fed this early, she has another thing coming.

ROAR

The Route of the Broadway Lion The Largest Subway Layout in North Dakota.

Here there be cats.                                LIONS with CAMERAS

  • Member since
    April 2004
  • From: SC
  • 318 posts
Posted by lonewoof on Wednesday, January 28, 2015 4:43 PM

Woof does not like Nokorode flux (Sorry, Lion); it is greasy, and if it says it has "Zinc chloride" or "Ammonium chloride" in it, then it is corrosive. Denatured alcohol should dissolve rosin flux. Trichlorethylene will too (if you can find it), but don't breathe a lot of it.

Remember: In South Carolina, North is southeast of Due West... HIOAg /Bill

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

Users Online

Search the Community

ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT
Model Railroader Newsletter See all
Sign up for our FREE e-newsletter and get model railroad news in your inbox!