It might help a bit, if the lights are LEDs and have resistors chosen so that they are drawing very low current - 1K or better for each, which would put them under 10ma each.
Or, it will work as a filter capacitor to get smooth DC from the track power - connect the AC side of a bridge rectifier to the track pickups, put the cap across the DC terminals (using correct polarity, unless you want to emulate the Lionel exploding boxcar). With a low current load it will be enough to smooth the edges of the rectified DCC.
--Randy
Modeling the Reading Railroad in the 1950's
Visit my web site at www.readingeastpenn.com for construction updates, DCC Info, and more.
richg1998 Probably if you have more than one. 250ufd is not much capacitance. Original DIY keep alive using capacitors like this was much more the 250 ufd. Rich
Probably if you have more than one. 250ufd is not much capacitance.
Original DIY keep alive using capacitors like this was much more the 250 ufd.
Rich
I wonder if by it's self it would atleast jeep the lights from flickering
TerryinTexas
See my Web Site Here
http://conewriversubdivision.yolasite.com/
If you ever fall over in public, pick yourself up and say “sorry it’s been a while since I inhabited a body.” And just walk away.
Was wondering if i could use a left over Tsunami Capacitor
for constant lighting in a passenger car
When i installed a Current Keeper to the Decoder i cut off the smaller capacitor as instructed
Hate to just throw it away
If so how do i wire it ?
">