Better than that, grab and old mouse and cut its tail off...no, not a furry one, one like the slick one next to you keyboard. Mouse wire is insulated, multi-strand and very flexible.
Mike Lehman
Urbana, IL
Yes, today at work I was looking at a box of scrap ethernet cable. I took a 4 ft section. Ten minutes later with the Xacto and I had four twisted pairs of very fine wire. More than I will ever need. Solid wire, but that fine, who cares? Problem solved.
Hi Redore
I have found a great source for very fine, like 22 to 30 gauge wire to be in old computer cables and internal wiring. Over the years I have accumulated lots of super flexible wire by cutting the ends off printer cables, mice, monitor cables, cat 5 (usually solid) and the like. Strip off the outer jacket and you have a trove of multi color fine wire. Some computers had ribbon cable inside that you can peel off as many conductors as needed, though its nearly always gray.
Often there is a bare ground or shield wire in there too and that makes a handy common wire when wiring multiple lights inside a structure.
There's a bin full of this stuff where I work plus what I've amassed in tinkering with computers over the past 15 20 years! Maybe there's a computer recycling center near you or ask around for old devices that you can cut the cords off. Sometimes this stuff is only about 3 feet or less but it fits the bill for much of our model use.
Have fun! ED
You are looking for "stranded wire" not "braided wire".
Jay
C-415 Build: https://imageshack.com/a/tShC/1
Other builds: https://imageshack.com/my/albums
Train Control Systems sells their decoder wire in multiple colors, but only in 10 foot lengths.
http://www.tcsdcc.com/public_html/Customer_Content/Products/Supplies/Wire/Wire.htm
Modeltrainstuff has a 10 foot bundle containing one each of the standard 9 NMRA colors for about $10. Search for digitrax decoderwire
--Randy
Modeling the Reading Railroad in the 1950's
Visit my web site at www.readingeastpenn.com for construction updates, DCC Info, and more.
When rewiring locomotives, or repairing them, it's handy to use the very fine wire that the manufacturers use more and more today. Is there a good reasonably priced source of this wire in bulk? Micro Mark has short lengths for like $2.00 / ft but that doesn't seem right. Digi Key has 1000 ft rolls, way more than I need.
I think this is 32 Guage AWG stranded wire.