Trains.com

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

Florescent Light Fixtures

579 views
2 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    July 2006
  • From: North Dakota
  • 9,592 posts
Florescent Light Fixtures
Posted by BroadwayLion on Friday, February 3, 2012 4:36 PM

LION just finished building a few "florescent" light fixtures. They are a little large for HO scale, probably a little large for O scale! But they are "fixtures" and are not supposed to be bare bulbs.

LION cut some white, plastic drinking straws into three inch lengths, put a dab of silicone caulk in each end, and then inserted a 5mm cool-white LED into each end. When the glue is dry I will bend one long lead and one short lead back along the outside of the tube and connect them with a 510Ω resistor. Then the long free lead goes to ground, and the short free lead goes to the +12v dc bus. I will glue these to the top of the passageways that they are intended to light, and I will place a bit of wood, plastic, paper or cardboard to shield the light from the viewing end. It is supposed to light the tunnel or passageway without shining light into the light meter on the camera, causing a bad photograph.

Photos of this project shall be forthcoming.

ROAR

The Route of the Broadway Lion The Largest Subway Layout in North Dakota.

Here there be cats.                                LIONS with CAMERAS

  • Member since
    February 2002
  • From: Reading, PA
  • 30,002 posts
Posted by rrinker on Friday, February 3, 2012 8:04 PM

 It was either here or in an MR article a couple of years ago that someone made soem very nice looking flourescent fixtures with styrene shapes. Or maybe it was that free online magazine, I know I've seen this, in fact I sort of remember commenting about drillign into it and putting in a white (the kinds that are somewher bluish) LED to light them up.

 yes, I am lazy tonight, just got done setting up the 25x110 modular layout and the doors open at 7am tomorrow (for vendors and exhibitors). So I leave it to someone else to Google and find what it is that I am talking about.

             --Randy


Modeling the Reading Railroad in the 1950's

 

Visit my web site at www.readingeastpenn.com for construction updates, DCC Info, and more.

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

Users Online

There are no community member online

Search the Community

ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT
Model Railroader Newsletter See all
Sign up for our FREE e-newsletter and get model railroad news in your inbox!