Trains.com

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

N SCALE DCC SOUND

2965 views
7 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    November 2005
  • From: Phoenix, AZ
  • 693 posts
Posted by woodone on Friday, March 25, 2011 10:46 AM

Sound for diesel locomotives is not here yet.  Narrow hood units just don't have enough room.

Now for steam I think that the Tsunami decoders do a good job of sound.

I have done many Kato Mikados and GS-4 units. They sound good and run very well.

As far as removing the weight in the tender, I have not had to remove any of the weight in my installs on these two locomotives.  On the InterMountain AC-12,  I do remove the weight to make a better speaker mounting. The weight of  the decoder, speaker and capacitor is a tad bit  more that the weight that I removed, plus I add a piece of aluminun for a heat sink,  so all together I have more weight in the tender than it came with.    

  • Member since
    November 2002
  • From: Thornton, CO
  • 763 posts
Posted by jwils1 on Friday, March 25, 2011 10:41 AM

Very good points regarding weight David.  This is something that I wasn't aware of and had some definite electrical pickup problems.  I added a small amount of lead weight to the top of the tender and it now runs fine.  I painted it black and it's not that noticeable, however for the purist it might not be acceptable.

Thanks for your post.  I was just thinking that I should post again to point out the weight problem that I encountered but you covered the subject nicely. 

Jerry

Rio Grande vs. Santa Fe.....the battle is over but the glory remains!

  • Member since
    November 2002
  • From: Thornton, CO
  • 763 posts
Posted by jwils1 on Friday, March 25, 2011 9:49 AM

I would have to say no to sound in N scale diesel but steam does offer room for decent sound.  I have a Bachmann Spectrum 2-8-0 with a Tsunami and the sound is very good.  However this can get pretty expensive if you have to have it profesionally installed like I did.  This installation was definitely beyond my skill level.

Jerry

Rio Grande vs. Santa Fe.....the battle is over but the glory remains!

  • Member since
    December 2006
  • 63 posts
Posted by DANSGRANDPAPA on Friday, March 25, 2011 8:34 AM

Thanks Guys, I kinda thought this would be the feeling on this. I suppose DCC  or perhaps just dc will do the trick!

DJB

  • Member since
    July 2003
  • From: Sierra Vista, Arizona
  • 13,757 posts
Posted by cacole on Thursday, March 24, 2011 9:08 PM

DCC may be okay but sound in N scale is most likely going to be a disappointment due to the small speaker sizes that must be used.

  • Member since
    December 2006
  • 63 posts
N SCALE DCC SOUND
Posted by DANSGRANDPAPA on Thursday, March 24, 2011 8:38 PM

Hey Folks,

I have a ton of dcc sound locos in HO, most I converted myself. Now Im in an apartment and want to try N scale. Whats your opinion of dcc with sound in N? Whats the best loco/decoder manufacturers match for say an F7 AB that pulls well and sounds good?

Thanks in advance!

DJB

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

Users Online

There are no community member online

Search the Community

ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT
Model Railroader Newsletter See all
Sign up for our FREE e-newsletter and get model railroad news in your inbox!