Phillyf Hi, Thanks for your response, how long was the cable?
Hi,
Thanks for your response, how long was the cable?
The cables come pre-made. They are 6-10 feet long. You can easily lengthen them if needed.
It also allows you to configure common cathode, and anode and also has wiring for searchlight, 2 and 3 led signals.
Springfield PA
Check Rob Paisley`s circuits. They are a lot cheaper and will do the same thing. Make sure the circuit you are looking at matches the configuration of the signal you are going to use. NJ international, & Tomar use common anode, Others use common cathode (Intergrated Signal systems) among others.If you just want ABS then Rob has a board that will do 5 blocks one way, He has a nice optical board that will detect LOW even though it is not on his website and this works for 4 blocks.
Bob D As long as you surface as many times as you dive you`ll be alive to read these posts.
The product works as advertised. With the straight optical sensors you sometimes get a bad signal trip with tank cars since they allow more light under the train. The sensors also do not work in a dimmed or darkened room. I haven't tried the infrared sensors but have heard that they are better.
Has anyone used The Automatic Block Signaling (ABS) Master carried by NJ International Signals. I beleive a company called TD or TDA produces it.
Has anyone installed signals and used this product. I'm interested in your feedback.
Thanks