Trains.com

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

MR Loco Sounds Article

867 views
4 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    August 2006
  • From: Nashville, TN area
  • 713 posts
MR Loco Sounds Article
Posted by hardcoalcase on Monday, November 8, 2010 7:29 PM

Andy's article in the current MR indicates that some steam decoders have the following effects;

  • cam-timed chuffs
  • out-of-step chuffs (simple articulated)
  • drift
  • open cylinder cocks

Which decorders might that be?

Jim

  • Member since
    July 2006
  • 3,312 posts
Posted by locoi1sa on Monday, November 8, 2010 7:53 PM

  Jim.

 Just about any sound decoder can have those features. Even the Blueline by BLI that you add a motor decoder has a timed chuff off a reed switch triggered by a magnet on the motors flywheel. I have had tremendous luck timing Soundtraxx LC decoders with no cam at all. They will all drift if given enough momentum in CV4 and working the throttle. Cylinder cocks can be programed in a few decoders like BLI, Paragon, QSI and Tsunami.

       Pete

 I pray every day I break even, Cause I can really use the money!

 I started with nothing and still have most of it left!

  • Member since
    February 2002
  • From: Reading, PA
  • 30,002 posts
Posted by rrinker on Monday, November 8, 2010 9:27 PM

 The Loksound decoder in my T-1 does automatic cylinder cocks when starting out. Most all sound decoders have a connection for a cam, even the lowly Digitrax Soundbug has a cam input.

                           --Randy

 


Modeling the Reading Railroad in the 1950's

 

Visit my web site at www.readingeastpenn.com for construction updates, DCC Info, and more.

  • Member since
    January 2007
  • From: Eastern Shore Virginia
  • 3,290 posts
Posted by gandydancer19 on Tuesday, November 9, 2010 2:00 PM

The Tsunami's have 'drift' and 'out-of-step chuffs' for sure if you get the heavy articulate version.  I haven't tried for the 'open cylinder cocks' quite yet.

You can also adjust the 'out-of-step chuffs' to move in and out of sync with each other to simulate one set of drivers slipping.  This really sounds good.

Elmer.

The above is my opinion, from an active and experienced Model Railroader in N scale and HO since 1961.

(Modeling Freelance, Eastern US, HO scale, in 1962, with NCE DCC for locomotive control and a stand alone LocoNet for block detection and signals.) http://waynes-trains.com/ at home, and N scale at the Club.

  • Member since
    October 2006
  • From: Western, MA
  • 8,571 posts
Posted by richg1998 on Tuesday, November 9, 2010 2:17 PM

Go the the sound decoder sites and look at the decoder specs. There are manuals and downloadable sounds. Store the links in Favorites as you will need them in the future.

http://www.esu.eu/en/start/

http://www.soundtraxx.com/

http://qsisolutions.com/index.html

There are Yahoo Groups for all three companies that are run by volunteers, not the companies.

I use all three of these companies decoders.

Rich


If you ever fall over in public, pick yourself up and say “sorry it’s been a while since I inhabited a body.” And just walk away.

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

Users Online

There are no community member online

Search the Community

ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT
Model Railroader Newsletter See all
Sign up for our FREE e-newsletter and get model railroad news in your inbox!