Is the one on the right for the pocket manual?
Springfield PA
Here is a home made one that is simple to make and looks sharp. Just change your design to match your particular throttle.
Terry in Sunny Florida
Thanks all.Great help.The walthers holder lookd great.That is my next buy.
I picked up some from mouseholder.com for $1.99 each. Made slight modifications to suit our NCE cabs. Used #2 sheet metal screws to mount.
I used a pair of wire cutters to cut the "V" a little wider for the cord at the bottom of the cab.
Rich
If you ever fall over in public, pick yourself up and say “sorry it’s been a while since I inhabited a body.” And just walk away.
I stocked up on these, when Micromark had them on sale for $4.75http://www.micromark.com/UNIVERSAL-CAB-HOLSTER,9137.html
Nick
Take a Ride on the Reading with the: Reading Company Technical & Historical Society http://www.readingrailroad.org/
I use Velcro strips on the back of the throttle and the legs of my layout.
It takes an iron man to play with a toy iron horse.
Someone posted a message here a couple of weeks ago about a Mouse Holder that was very inexpensive compared to the Universal Controller holder or whatever Walthers calls it.
That's probably the best one out there and mounts in less than a minute.
Hi!
I picked up the universal holders (like Walthers has) on Ebay, but most of the bigger internet stores have them as well. I've got two Digitrax DT-400 throttles and they sit in there just fine.
Mobilman44
ENJOY !
Living in southeast Texas, formerly modeling the "postwar" Santa Fe and Illinois Central
Alton Junction
After getting a powercab I need something to hold the hand unit.Anyone come up woth a nice holder idea for holding these.Thanks for any help.Bob