For MTH SD70Ace and MRC Prodigy wireless controller , I don't know about setting value CV for change Direction locomotive, please help me about how should I set value of CV for change direction of MTH SD70Ace = ?
Thank you very much.
I am not sure what you are asking. Do you want to set up the locomotive so the long hood is normally forward? If that is the case then add 1 to whatever is in CV29. If you just want to change direction then just push the direction button on the controller. If you want to just consist in the reverse direction with another loco that is done when setting up the consist with your controller. Read the manual that came with your DCC system for consist setup.
Pete
I pray every day I break even, Cause I can really use the money!
I started with nothing and still have most of it left!
Be careful with CV29. MTH doesn't use the Standard. They have their own little world.
Springfield PA
pakp For MTH SD70Ace and MRC Prodigy wireless controller , I don't know about setting value CV for change Direction locomotive, please help me about how should I set value of CV for change direction of MTH SD70Ace = ? Thank you very much.
From what I have found out the NDOT (normal direction of travel) option normally found in CV29 is not supported by MTH yet. This is part of their limited DCC implementation. Supposedly an upgrade option is coming to provide more complete DCC support.
Engineer Jeff NS Nut Visit my layout at: http://www.thebinks.com/trains/