What do you mean by "works with DCC?"
There are two aspects to consider. First, does the trackwork support DCC easily? This is determined by whether the frog is conducting or non-conducting, and whether the turnout is "power routing" or not. It lets you know if you can use the turnout to power the diverging routes (frog end) from the incoming route (point end.) Depending on the turnout, you may be forced to have feeders beyond the turnout, have optional feeders beyond the turnout, or have no feeders beyond the turnout (without insulators.)
The other aspect is the control of the turnout. This is all about how the switch machine is controlled. While you can use DCC to control turnouts, you don't have to.
It takes an iron man to play with a toy iron horse.
Co-owner of the proposed CT River Valley RR (HO scale) http://home.comcast.net/~docinct/CTRiverValleyRR/
Huh?
The Micro Engineering turnouts are offered in DCC-friendly format, so the frogs are isolated from the rest of the turnout.
http://www.hobbylinc.com/htm/mce/mce14705.htm
Note: I merely googled and came up with this site offering the turnouts and also a description. I have never purchased from, nor communicated with, hobbylink.
-Crandell
What?
That would be the "or similar"
Springfield PA
What about Micro Engineering?
I use Peco Insulfrog turnouts with my DCC layout with no problems.
Simon Modelling CB&Q and Wabash See my slowly evolving layout on my picturetrail site http://www.picturetrail.com/simontrains and our videos at http://www.youtube.com/user/MrCrispybake?feature=mhum
You can upgrade practically any turnout using a Tortoise switch engine or similar, and a DCC accessory switch such as the NCE switch 8 or switch-it. I use them and they're great.
Also There will soon be a tortoise with DCC built in.
http://www.ncecorporation.com/ncetest/switchb1.pdf
I use both Atlas Code 83 and the new Walthers Code 83 turnouts (HO scale) with DCC. They work great. They are DCC friendly and you do not have to do any special wiring.
Jim, Modeling the Kansas City Southern Lines in HO scale.
Would any one know who make turn outs that will work with DCC.