Graffenthe only that are not compatible are...all locomotives from MTH
Michael,
Actually, the E-Z Command will run an MTH locomotive just fine. However, there are certain sounds that will not be accessible except via an MTH DCS controller. And this would be true of any DCC system.
Eagle,
With the E-Z Command you'll be able to enjoy function sounds F1-F8. IMO, that's about all the worthwhile functions there are. The rest are more "gimicky". You can even run one (1) DC locomotive.
Also, although not necessity, F9 is convenient with QSI decoders as it allows you to put them in "hibernation mode" - i.e. put them to sleep so that they don't draw power when their not in use. You bring them out of hibernation by double-pressing F6 quickly.
Tom
https://tstage9.wixsite.com/nyc-modeling
Time...It marches on...without ever turning around to see if anyone is even keeping in step.
I had great luck with my E-Z. I ran QSI Sound Decoders, Loksound Sound Decoders and Digitrax Decoders with no problem. In other words you can just about run anything you can buy.
I have had great luck with Proto 1000 and 2000 engines, more than what a Bachmann will cost, but worth every penny.
Cuda Ken
I hate Rust
Welcome to the Dark side You can use all locomotives that are equipped with a DCC-decoder, the NMRA DCC standard is the biggest in the world, the only that are not compatible are some European systems (Märklin, Selectrix and Conrad digital) and all locomotives from MTH. If you buy locomotives without decoder, make sure they are DCC-ready. If they are, you can install a (contact equipped) decoder yourself. Just plug it into the socket inside the model. Good luck!
Swedish Custom painter and model maker. My Website:
My Railroad
My Youtube:
Graff´s channel
Hi all I have recently purchased the DCC EZ Command system as a start out in the DCC World. Whilst reading the instructions it make mention that the "EZ Command will operate DCC euipped locomotives from many manufacturers and offers many features previously found only on more expensive digital systems." Whilst I am starting out I have found that there are other manufacturers locos that I am intersted in. Any anybody assist in what manufacturers locos are compatible with the Bachmann EZ Command.