Hi there
I was wondering if any of you guys could tell me what ratio the scale time is that is displayed on the NCE throttle ?
Is it 10:1 or something similar ?
Is it possible to re-set the fast-clock on the throttle ?
Thank you in advance for your replies
cheers
bagman,
I assume you're talking about the fast clock? As David already stated, it should be in your Pro Cab manual.
Tom
https://tstage9.wixsite.com/nyc-modeling
Time...It marches on...without ever turning around to see if anyone is even keeping in step.
That's correct.
I must be blind......can't see any mention hence my post.
Have to take another look.
It's page 65 of the old PH Pro manual, section "Setting the Clock". There's no mention of the clock in the smaller ProCab manual other than to mention what button code it is. Probably only in the system manual because the cab itself can't be a clock, it needs the command station.
--Randy
Modeling the Reading Railroad in the 1950's
Visit my web site at www.readingeastpenn.com for construction updates, DCC Info, and more.
bagman Hi there I was wondering if any of you guys could tell me what ratio the scale time is that is displayed on the NCE throttle ? Is it 10:1 or something similar ? Is it possible to re-set the fast-clock on the throttle ? Thank you in advance for your replies cheers
After checking the NCE website, both the PowerHouse Pro and PowerCab manuals show how to set the system clock time and fast clock ratio. Default ratio for the clock should be 1:1. The display screen on the ProCab will walk you through setting and adjusting the clock step by step.
Hi guys
Thank you all for your replies.
After going back to my manual, sure enough as you all pointed out, there were the instructions clearly printed.
I must need new glasses !!
Sorry for wasting your time