I have some DH123 I want to speed match with a SEB. Can I program the decoders on the fly or do I need to stop them first?
Thnaks, Cuda Ken
I hate Rust
As far as I know, all decoders can be programmed on the fly, Ken. I guess not for address change and a programme track, but in Ops Mode and setting all the other CV's, sure, do it while they are running. I set the chuff rate on my Tsunami's and QSI decoders on the fly.
-Crandell
If you are asking if your SEB will program on the main? The answer is YES. Select the address of the loco that you want to program then press the Program button until Po appears in the window. From there , it's the same as if you were on the programming track.