yes but in the early days manufactures did their own thing as far as dcc, regardless of the NMRA all trying to become the standard.
The NMRA 8 pin socket goes back to the earliest days of DCC. Either Walthers saved a penny by not including the socket, expecting people to just stick the wires of a wired decoder in the holes and solder them to the board, or someone forgot to fit the socket when the board was made.
The one thing that is still not standard is what "DCC Ready" means. Still can mean anythign from "it will take you longer to open the loco than to actually install a decoder" to "you have to completely rewire the loco to make it work AND not fry decoders"
--Randy
Modeling the Reading Railroad in the 1950's
Visit my web site at www.readingeastpenn.com for construction updates, DCC Info, and more.
What you don't relize is that what is standard today, was not always standard, it became that way.
I think that Randy provided the definitive answer four years ago when the 2009 thread was revived for the first time.
Rich
Alton Junction
I dunno, the right answer when it is guaranteed to work is to remove the factory circuit board, which in more cases than I care to think about are just wrong, and wire a decoder right in. Then you know each wire is going to the right place.
I seriously doubt they meant to leave off the socket, either a previous owner removed it or it was just an oversight at the factory.
Chuck, at least, came up with a definitive answer.
Henry
COB Potomac & Northern
Shenandoah Valley
Wow, a double necro topic! That’s a first!
Regards, Isaac
I model my railroad and you model yours! I model my way and you model yours!
richhotrain I'll betcha that the OP has been sitting on pins and needles waiting for a reply - - going on 11 years now. Rich
I'll betcha that the OP has been sitting on pins and needles waiting for a reply - - going on 11 years now.
11 years would work for me at the rate I work on projects
Sure, you are meant to solder in a socket for 8 pins, then plug an 8 pin decoder into that.
Yeah but there is the followup guy with the same problem, that one is fron 2 days ago.
tstage I imagine the OP has probably figured it out since posting this nearly 7 years ago... Tom
I imagine the OP has probably figured it out since posting this nearly 7 years ago...
Tom
https://tstage9.wixsite.com/nyc-modeling
Time...It marches on...without ever turning around to see if anyone is even keeping in step.
I'm with David, if the pins flop around in the holes then there is a part missing. The pins and sockets are standard electronic industry items and I've never heard of one or the other being a different size.
Simple solution - remove the factory board and just hardwire a decoder.
The 8 holes for the decoder pins are oversize, so the usual decoders flop around in them. Are any DCC decoders made with large pins to fit Walthers 8-pin DCC ready boards?
Hmm. If you have one, a digital picture or pictures of the plug posed nearly perpendicular to the socket might be of assistance. I've not heard of this from friends running H-10s. I'm presuminbg you mean he 2x4 set of holes is spaced too far? or the holes are too big to maintain a tight loc to hold the decoder plugs in? If the former,I would suggest calling Walthers. Wel,, not this minute, you might wait until they open. If the latter, then you might try a tiny dab of solder on the plugs individually, being careful not to let them touch each other. Tjis would help to thinckent eh posts and lock the decoder in. Otherwise, I'm confused
-Morgan