davidmbedard Is this factory installed sound or aftermarket?It is a good lesson. It is best to keep a chart somewhere, where you list which locomotive has which decoder. And it is important to give the specifc model of the decoder (ie: Digitrax DH123). David B
Is this factory installed sound or aftermarket?
It is a good lesson. It is best to keep a chart somewhere, where you list which locomotive has which decoder. And it is important to give the specifc model of the decoder (ie: Digitrax DH123).
David B
David makes a good point. It is a good idea to keep track of the decoder and the associated CV settings. If you get the Digitrax PR3 and download DecoderPro, you will be able to program your decoders and maintain a database of the CV settings. You will also be able to work with the sound projects of certain Digitrax sound decoders.
I hope this helps.
Vernon in Central Indiana
Yea Jim, I remember getting the QSI manual with the loco.
Andy,
Your Atlas engine should have a QSI sound decoder.
Jim
Modeling BNSF and Milwaukee Road in SW Wisconsin
Good tip David, I'll try it. Oh, and by the way, it was a factory installed decoder.
David,
I have been using the new Atlas North Shore GP38 wit sound installed. It's in HO scale. I'm not sure what decoder it has in it, probably Atlas.
Full function throttles like the DT400 or DT400R will work. To go radio 'wireless', you will need to get:
The UT4/UT4R series throttles are limited in function(like building consists, and programming). I would buy at least one DT400/DT400R throttle. A friend of mine has a single DT400R throttle he uses to 'program' with and build locomotive consists for his operating sessions. He then 'steals' the consist with one of his four UT4R throttles and hands the UT4R to the engineer of the train. He does not want the operating crews to to have a powerful DT400R in their hands. This reduces the chance of accidently breaking up a consist or other 'pranks'.
The UR90 'infared' base station and the DT400/UT4 throttles use infared beams to comunicate. Though they are not limited to 'line of sight', you better have lots of white paint in the ceilings/walls of your train room so the signal can 'bounce'. Also, make sure no one is standing in front of the UR90 base station!
The DCS050 'Zephyr' is a great command station. The 'built in' throttle is limited, but is included in the base price. The system has a lot of features:
Jim Bernier
Hey Thanks Martin and David. I guess I'll clean the wheels of my loco, and now that I think of it, that's really the only one that does that?
Thanks, Cheers,
Andy
Big one is a DT400
Smaller one is the UT4.
I agree with David, the stalling is caused by poor pickup between the track and the loco not the DCC system. Solve that before upgrading any thing because the trouble will continue.
Martin Myers
Thanks David, I'll consider it. What are the throttles that are obong with more capabilituies that is put out by digitrax?
Hi everyone. I currently have the Digitrax Zephyr as my DCC system. I don't really like it and I would like to get a new system. I would like to have more mobility with a DCC system. I was looking at an NCE system, because you have wireless throttles. The wireless throttle idea seems nice, even though I have a small switching layout, the wireless option is nice because I have to move around alot to get to my different industries. Also, with the digitrax system, when I running a locomotive, sometimes the engine will stop and then start up again. Especially with a sound loco, it will continue to run, but will stop and then start up again. I would like a simple DCC system with a wireless or tethered throttle. Also, it only has to have one throttle, at a reasonably low cost.