It would make a nice gondola load. lol
Terry in Smokin FLorida
JW
Not sure how to wire up a cap for loco pwr. I know how/where to hook up a cap for most of the sound decoders that are out now but never thought much about a cap for a loco. Maybe as simple as wiring a big ole cap in parallell with the motor would do it? Maybe someone more knowledgeable can provide some info.
I used 2200uf caps rather than the tiny one the author used and I get about 4 seconds of light before it dims significantly.
Dr. Frankendiesel aka Scott Running BearSpace Mouse for president!15 year veteran fire fighterCollector of Apple //e'sRunning Bear EnterprisesHistory Channel Club life member.beatus homo qui invenit sapientiam
Tks everyone for your help. Yep thats the ones Jeff. I found them for 8.44 at RRTrains so i will be ordering them tonight. DIdn't really want to order without being sure it was what I wanted.
Just finished lighting a caboose and 60' combine with the ckt in the latest MRR mag. I already had the pwr p/u's so the total cost of putting lights in each was less than one dollar. I found everything I needed at Allelectronics.com. I used 2200uf caps rather than the tiny one the author used and I get about 4 seconds of light before it dims significantly. I just picked up the combine and walked into the kitchen and sat it on the table and the lights were still dim. I notice the loco's headlight flicker a little as it runs down the track but the combine and caboose lights never flicker. Awesome! I was going to get the minitronics segmented light board with the mega cap in it for 23-25 dollars. Now for under a buck I have a flicker free light. I don't get the four minute hang time theirs does but four seconds is a butt load of time in HO so unless you park on a frog or dead spot you are good to go. If I get a chance tomorrow I will post some pics. All I had was white leds so I went over them with a yellow highlighter and it looks much better than bright white.
Anyway thanks for all the help. Now that the proto-type is done I have some more cabeese and another combine to do.
Terry in Florida
Found this page at Loy's Toy's website.
Scroll down the page and click on the thumbnail picture.
Ned tks for the info. Never thought to look in the Walthers Catalog. Unfortunately I only have the 2007 edition and I can't find it. I looked in the Lighting-electrical-motor section. Is that the correct section? I found that item # in the online walthers site but does not show a pic. ALso found that item at rrtrains.com for 8.44 but again no pic. Don't want to spend 40 bucks without seeing a pic. Again thanks for your help.
I bought two sets of these several years ago and am very happy with their performance and would like to get some more. However I have no clue where I purchased them online? Anyone have any sources? Ideas? Tks.