Dound in KATO SD40-2

[wedudler]

I've added in a few H0 engines sound, even in an Kato NW2. These engines were without the plug.    

Here can you see some pictures. And at my homepage you can find How To's.

Wolfgang 

[tstage]

Sorry, I'm real new to DCC, I just got it this month. Anybody got advice?

Advice on DCC about...?  sfboy, you should create a whole new post so that your question can be answered separately.

Tom

[steamfreightboy]

Sorry, I'm real new to DCC, I just got it this month. Anybody got advice?

[tomytuna]

i'm HO

[Woofda]

Digitrax unit

[Woofda]

Has anyone heard the sound for the SD40-2?  Because the soundtrax comes with the SD38-2 sounds installed. If the sound for the SD40-2 is very good I guess that I'll have to break down and get the software to install it.

[dad1218]

   IHB Geek,

   Try www.aztectrains.com , they have SD-40/45 listed.

        Gary

 

[IHB Geek]

Gentlemen,

I too am looking for DDC sound solutions for both Kato SD40-2s and SD38-2. 

My question for all previous recommendations is:  are you guys talking about HO or N scale?

I'm specifically looking for N-Scale, if anyone can help out.

Thanks!

IHB Geek

[tomytuna]

Thanks guys for the info...the ones i bouht are thenew in 2008 mid version with the baffle in fuel tank...any thoughts on soundtrax plug and play?....Tom

[rangerbob]

Since I liked the Loksound EMD 645 sound for the SD40-2, I installed it in a Kato "snoot" unit (an earlier version without the speaker holes in the fuel tank), managing to get the decoder into the nose, leaving the area above the rear truck to install the speakers (mini pair). Therefore, I was able to keep the weight in it.

 

Bob

[Tilden]

  David is right on with that one.  I have a KATO SD38-2 with the well for speaker in the fuel tankd and the Digitrax unit went in with no problems.  Otherwise, space is at a premium for speakers.

Tilden 

[tomytuna]

I've purchased 2 Kato SD40-2 and have them running DCC with new decoders...They are sweet..unfortunatly i've become addicted to sound equiped engines..does anyone have any experience with installing sound decoders into these new engines from KATO?...any and all help is greatly apprecieated...thanks Tom