HAND CONTROLLER HOLDER

[fender777]

After getting a powercab I need something to hold the hand unit.Anyone come up woth a nice holder idea for holding these.Thanks for any help.Bob

[richhotrain]

http://www.walthers.com/exec/productinfo/501-40020

 

[mobilman44]

Hi!

I picked up the universal holders (like Walthers has) on Ebay, but most of the bigger internet stores have them as well.  I've got two Digitrax DT-400 throttles and they sit in there just fine.

Mobilman44

[Hamltnblue]

 That's probably the best one out there and mounts in less than a minute.

[cacole]

Someone posted a message here a couple of weeks ago about a Mouse Holder that was very inexpensive compared to the Universal Controller holder or whatever Walthers calls it.

 

[MisterBeasley]

I use Velcro strips on the back of the throttle and the legs of my layout.

[nbrodar]

 I stocked up on these, when Micromark had them on sale for $4.75
http://www.micromark.com/UNIVERSAL-CAB-HOLSTER,9137.html

Nick

[richg1998]

 I picked up some from mouseholder.com for $1.99 each. Made slight modifications to suit our NCE cabs. Used #2 sheet metal screws to mount.

 I used a pair of wire cutters to cut the "V" a little wider for the cord at the bottom of the cab.

Rich

[fender777]

Thanks all.Great help.The walthers holder lookd great.That is my next buy.

[scubaterry]

 Here is a home made one that is simple to make and looks sharp.  Just change your design to match your particular throttle.

 

 

 

 

Terry in Sunny Florida

[Hamltnblue]

 Is the one on the right for the pocket manual?