Trains.com

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

Diesel service facilities

3538 views
7 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Thursday, July 21, 2005 11:15 PM
Thanks to all. You have confirmed what I thought--there is no difference between passenger and freight servicing (except for washing). My freight and passenger yards are at opposite ends of my layout--separated by more than 10 "miles."
  • Member since
    October 2001
  • From: OH
  • 17,574 posts
Posted by BRAKIE on Thursday, July 21, 2005 10:19 PM
Dave,One passenger terminal that comes readily to mind as far as Engine service area is the Cincinnati Union Terminal.This servicing area lasted until Amtrak.

Larry

Conductor.

Summerset Ry.


"Stay Alert, Don't get hurt  Safety First!"

Moderator
  • Member since
    June 2003
  • From: Northeast OH
  • 17,255 posts
Posted by tstage on Thursday, July 21, 2005 10:15 PM
crawfordc,

The Kalmbach book is called The Model Railroader's Guide To Locomotive Servicing Terminals, by Marty McGuirk. It's a good reference book that covers both steam and diesel servicing facilities. As Dave stated, diesel facilities included sand, water, fuel, and oil. There were also inspection pits and wash racks.

Tom

https://tstage9.wixsite.com/nyc-modeling

Time...It marches on...without ever turning around to see if anyone is even keeping in step.

  • Member since
    September 2003
  • From: Omaha, NE
  • 10,621 posts
Posted by dehusman on Thursday, July 21, 2005 9:35 PM
ALL diesels use fuel, sand, water and oil. There is no difference between freight and passenger service. Actually, most railroads didn't have separate engine service facilities unless the passenger station and freight yards were very far removed (10 miles?)

Dave H.

Dave H. Painted side goes up. My website : wnbranch.com

  • Member since
    October 2001
  • From: OH
  • 17,574 posts
Posted by BRAKIE on Thursday, July 21, 2005 9:27 PM
Usually the passenger terminals lack full engine servicing area.Some times the passenger units would be taken to the regular engine servicing area for servicing.Those passenger terminals that did have passenger engine service areas had,fuel,water,oil,engine coolant ,sand and RIP parts for minor repairs.
However recall in later years these passenger terminal engines service areas was closed and the passenger units was service at the regular engine service area.

Larry

Conductor.

Summerset Ry.


"Stay Alert, Don't get hurt  Safety First!"

  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Thursday, July 21, 2005 7:53 PM
To: tjsmrinfo
So what are the book titles--Kalmbach and Carstens publish a lot of books.
Thanks.
  • Member since
    September 2003
  • From: sherman,tx
  • 492 posts
Posted by tjsmrinfo on Thursday, July 21, 2005 7:37 PM
crawfordc you may want to get 2 books on engine service facilities 1 is by kalmbach publishing the other is by carstens publications. as you know kalmbach puts out model railroader and castens puts out railroad model craftsman.

hope this helps

tom
  • Member since
    April 2003
  • 305,205 posts
Diesel service facilities
Posted by Anonymous on Thursday, July 21, 2005 7:18 PM
Period modeled: 1941 to 1968
Is a sand tower and drying house "correct" for a passenger diesel service facility? Or just fuel and water?
Is a water column and storage tank "correct" for a freight diesel service facility? Or just fuel and sand?
Thanks for the answers.

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

Users Online

There are no community member online

Search the Community

ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT
Model Railroader Newsletter See all
Sign up for our FREE e-newsletter and get model railroad news in your inbox!