Login
or
Register
Subscriber & Member Login
Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!
Login
Register
Home
»
Model Railroader
»
Forums
»
Prototype information for the modeler
»
What loco for passenger train?
What loco for passenger train?
1515 views
5 replies
Order Ascending
Order Descending
jxtrrx
Member since
January 2005
From: Southern Colorado
752 posts
Posted by
jxtrrx
on Thursday, April 7, 2005 11:40 PM
You guys are amazing. Thanks for the expertise!
-Jack My shareware model railroad inventory software:
http://www.yardofficesoftware.com
My layout photos:
http://s8.photobucket.com/albums/a33/jxtrrx/JacksLayout/
Reply
coalminer3
Member since
January 2001
From: WV
1,251 posts
Posted by
coalminer3
on Wednesday, April 6, 2005 3:19 PM
Some roads had dual-purpose locomotives; for example, NYC 4-8-2s were used on both freight and passenger trains. Also, some lines used different types of power depending upon terrain; C&O comes to mind in this case. Then there were still roads, (PRR, NYC, NYNH&H, MILW all come to mind that used both electric and steam power and electric and diesel power) - Lots of possibilities.
work safe
Reply
West Coast S
Member since
February 2005
From: Los Angeles
1,619 posts
Posted by
West Coast S
on Wednesday, April 6, 2005 12:35 PM
Don't forget the Western Pacific had Baldwin 2-8-2s specifically built for passenger service, they survived in secondary passenger service until steam was retired in 1953.
SP the way it was in S scale
Reply
IRONROOSTER
Member since
June 2003
From: Culpeper, Va
8,204 posts
Posted by
IRONROOSTER
on Wednesday, April 6, 2005 10:54 AM
In general (and there are plenty of exceptions), steam locos with 4 wheel leading trucks were used in passenger service, because they could travel at higher speeds. For the Heavyweight Era of the 1920's and 1930's you could expect to find 4-6-2's, and 4-6-4's, and 4-8-4's on the main passenger trains, double headed if neccessary. Different roads had different preferences for which one, i.e. PRR used 4-6-2's, NYC used 4-6-4's, etc.
Enjoy
Paul
If you're having fun, you're doing it the right way.
Reply
ndbprr
Member since
September 2002
7,486 posts
Posted by
ndbprr
on Wednesday, April 6, 2005 9:50 AM
The Bachman Spectrum cars are Pennsylvania class P-70's. Some were sold in the 60's but I doubt either railroad you mention bought any. most of them went overseas. IF being that prototypical doesn't bother you then you can use anything from a steam engine through diesels to pull them. They are a pretty good car certainly not up to present detail standards of the Walthers and other current production but should be very dependable. For steam you could use any of the following classes: 2-6-0, 2-6-2, 2-6-4, 4-4-2, 4-8-2, 4-8-4, 4-4-4-4 or 6-8-6. The last two are PRR T1 (BLI or Bowser) and S1 (brass only). Diesels could be: R1,2 0r 3, GP7 or 9, FP7, E6,7 or 8, C liner, F7 if ATSF and probably some others.
Reply
jxtrrx
Member since
January 2005
From: Southern Colorado
752 posts
What loco for passenger train?
Posted by
jxtrrx
on Wednesday, April 6, 2005 9:36 AM
I'm pretty new to this... I'm thinking of buying some HO Bachmann Spectrum illuminatd heaveyweight passenger cars (SF or UP). What would be an appropriate loco to pull them? And, any comments on the Spectrum cars? Thanks.
-Jack My shareware model railroad inventory software:
http://www.yardofficesoftware.com
My layout photos:
http://s8.photobucket.com/albums/a33/jxtrrx/JacksLayout/
Reply
Subscriber & Member Login
Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!
Login
Register
Users Online
There are no community member online
Search the Community
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT
Model Railroader Newsletter
See all
Sign up for our FREE e-newsletter
and get model railroad news in your inbox!
Sign up