Login
or
Register
Subscriber & Member Login
Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!
Login
Register
Home
»
Model Railroader
»
Forums
»
Prototype information for the modeler
»
Placement of whistle signs/posts
Placement of whistle signs/posts
2537 views
6 replies
Order Ascending
Order Descending
Anonymous
Member since
April 2003
305,205 posts
Posted by
Anonymous
on Wednesday, February 2, 2005 9:50 AM
1/4 mile has been the industry standard distance for a long while, although on low-speed lines it's an excessive distance.
The main idea is to give motorists and pedestrians at least a 15- to 20-second warning of the train's approach to the crossing. You can "engineer" this distance on a model railroad by running a loco or train at your usual "track speed" from the crossing toward the location you would like for your whistle post. Mark the location where the engine arrives after a 15-second run, and place your whistle post there.
This process occurs naturally to anyone from Wisconsin, where distances customarily are expressed in hours and minutes rather than in feet or miles, e.g., "Milwaukee is an hour-and-a-half north of Chicago."
Reply
Edit
Pennsy58
Member since
August 2003
From: Conemaugh Division
389 posts
Posted by
Pennsy58
on Wednesday, February 2, 2005 12:28 AM
From real life, the federal regs require the whistle be sounded no less the 1/4 mile from the crossing, closer if space is not present for that distance. The tones must be continious and/or repeated until the train accupies the crossing.
Couldnt find a reference in quick regarding the sign placement. But, sense would tend to dictate that the signs would be placed 1/4 mile away from the crossing on a main.
Still, I agree that thats quite far away in HO scale to replicate prototype distances.
Reply
Anonymous
Member since
April 2003
305,205 posts
Posted by
Anonymous
on Tuesday, February 1, 2005 9:45 PM
11 (eleven) scale feet from center line of track
Reply
Edit
markpierce
Member since
April 2003
From: Martinez, CA
5,440 posts
Posted by
markpierce
on Tuesday, February 1, 2005 9:04 PM
Sorry, but I think placing the markers within a foot defeats the purpose unless you have an extremely small layout. For most (e.g. garage and mid-sized bedroom layouts) I'd suggest 2.5 to 4 feet.
Reply
Noah Hofrichter
Member since
January 2004
From: Reedsburg WI (near Wisconsin Dells)
3,370 posts
Posted by
Noah Hofrichter
on Tuesday, February 1, 2005 3:51 PM
I've heard 500 feet is a standard distance, but that doesn't always happen, it may be longer or shorter than that. Now on a model railroad, 500 feet is close to 6 feet in HO scale, so it's impossible to do. If you put it about a 6-10 inches from the crossing, it should look about right, but if it's a fast speed line, you may want to put it a little farther.
Noah
Click the image above to visit my website, Badger Rails. My Model Railroad Club's website:
http://sandhousecrew.webng.com
Reply
ndbprr
Member since
September 2002
7,486 posts
Posted by
ndbprr
on Tuesday, February 1, 2005 2:07 PM
There isn't a set distance other than early enough for the engineer to react and blow two longs a short and a long. I've heard the Super Chief blow off a town in the middle of nowhere just blowing a series of whistle blasts through all the crossings in town and I've heard a PRR K4 go through a town with the whistle tied down for the same reason.
Reply
ole1
Member since
February 2005
54 posts
Placement of whistle signs/posts
Posted by
ole1
on Tuesday, February 1, 2005 1:53 PM
I would like to know where whistle (W) posts are placed for a two track mainline
Reply
Subscriber & Member Login
Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!
Login
Register
Users Online
There are no community member online
Search the Community
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT
Model Railroader Newsletter
See all
Sign up for our FREE e-newsletter
and get model railroad news in your inbox!
Sign up