This photo show's my combination/caboose marker light's . They are lit with a grain - of - Rice light incerted into the center of each one. The Green / Red lense's are painted with transparent colored paint on the backside.
I plan on doing something similar to the interior light's . Oil lamp's with Chimmny's, hanging from the celing.
This was my take on Oil / Acetylene lamp's .....
Your milage may vary ...
Rust...... It's a good thing !
rrinker My plan to light a few of them, I will use a function decoder with a flicker effect to represent the oil lamps at the conductor's desk.
Lots of cabooses were fitted with Aladdin Caboose Lamps.
Aladdin_1 by Edmund, on Flickr
This is the best photo I could find of one of mine.
I've collected a few of these. They have a leaf-spring shock mount that helps reduce shock. They burn with a fairly bright, maybe equivalent to a 35 watt incandescent, light. Not far off from a bright-white LED but more on the greenish side rather than blue. They use a woven incandescent mantle.
I burn K-1 kerosene in them and with the wick properly trimmed, there is hardly any flicker at all.
Many of the ones I've seen in cabooses have had the shade "customized" with thin aluminum flashing or even tin-can metal to provide more shielding of the light.
Still, some of my lighted cabooses are very dimly lit as the crew would usually want to preserve night-vision.
http://www.jeffpolston.com/aladdin.htm
Thank You, Ed
On my railroad, oil lamps were used in the cabooses well past my era. Same with the markers. Batteyr operated markers came before they put electric lighting in the cabooses.
My plan to light a few of them, I will use a function decoder with a flicker effect to represent the oil lamps at the conductor's desk. An SMD LED and a piece of clear sprue should make something that looks enough like an oil lamp.
--Randy
Modeling the Reading Railroad in the 1950's
Visit my web site at www.readingeastpenn.com for construction updates, DCC Info, and more.
Generally passenger cars would have light fixtures using either oil or gas, rather than having oil-burning hand-lamps hanging up. In some cases, the fixtures were later retro-fitted for electric lights, although some later had both. (My dad, born 100 years ago - April 1918 - grew up in a house with electric lights that still also had working gaslight fixtures too.)
Except for producing a yellowish light, from the outside at night it wouldn't look that different from a car with electric lights. Keep in mind many modellers use lights in their cars and buildings that are way too bright, so picturing a model car with electric lights may look different than the real thing.
dknelsonSo would it be safe to assume that in the days before electrical lighting in passenger trains, someone standing outside the passenger train trackside would not really see the brilliantly lit interiors that most lighting systems provide?
I think Halogen lights are out.
Chip
Building the Rock Ridge Railroad with the slowest construction crew west of the Pecos.
So would it be safe to assume that in the days before electrical lighting in passenger trains, someone standing outside the passenger train trackside would not really see the brilliantly lit interiors that most lighting systems provide?
Dave Nelson
Thanks everyone.
RR_MelCheck this out.
Holy Majoley
Acetylene predated Pintsch gas, and the latter, when introduced, often re-used the acetylene tanks and piping, with the addition of another pressure regulator.Here's an Athearn Blue Box steel coach, converted into a 61' wooden express car, built to match a photo of the prototype car and equipped with Pintsch gas tanks...
This one was originally an Athearn Pullman....
...also lit by Pintsch gas.
Wayne
erikem As others have commented, 1890 era passenger cars were mostly lit by oil, though Pintsch gas was catching up by the end of the decade and a very few trains were lit electrically.
As others have commented, 1890 era passenger cars were mostly lit by oil, though Pintsch gas was catching up by the end of the decade and a very few trains were lit electrically.
Pintsch gas was the most popular and common between 1890 and 1910. Pintsch gas was very similar to what the Coleman camping lanterns used, distilled naptha.
Pintsch_c by Edmund, on Flickr
Incandescent lamps really didn't catch on until 1915 or thereabouts.
Pintsch_0003 by Edmund, on Flickr
Pintsch_0001 by Edmund, on Flickr
Pintsch_0002 by Edmund, on Flickr
Pintsch gas lamps were relatively bright giving off a nearly white light. Much like the Aladdin caboose lamps of later years and still used in some cabooses right through the 1980s.
Pintsch_0004 by Edmund, on Flickr
I was fascinated to find that some trains around 1910 or so had steam-driven dynamos in one of the head-end cars and power was fed to the following cars with cables between them. Amtrak's Head End Power was nothing new!
Good Luck, Ed
ATLANTIC CENTRALHung from the ceiling over the isle in passenger cars, with gimbled mounts to keep them level.
So basically, they won't be seen in an HO old-time passenger car set a 42" off the ground.
ATLANTIC CENTRALHung on the walls in a caboose.
I'll have to think about this one. Maybe I'm already thinking too hard. I'm still a ways from running track. Lighting a caboose might be years away.
SpaceMouse hon30critter I would try using a piece of 3/32" clear styrene rod and applying some heat to stretch the rod into the shape of an oil lamp chimney And put the LED in the base? Cool idea. Would the oil lamps be wall mounted or on a table?
hon30critter I would try using a piece of 3/32" clear styrene rod and applying some heat to stretch the rod into the shape of an oil lamp chimney
And put the LED in the base? Cool idea.
Would the oil lamps be wall mounted or on a table?
Hung from the ceiling over the isle in passenger cars, with gimbled mounts to keep them level.
Hung on the walls in a caboose.
SpaceMouseI'm thinking mini oil lamps might be a tad impractical and hard to light.
Ha, ha, ha!
FYI, I used 0402 warm white LEDs in my early 1900s Mckeen Motor Car with 30,000 ohm resistors, one per LED, on DCC. They give off a very nice glow when seen by the naked eye. Unfortunately my digital camera makes them look way too bright so there isn't much use in posting a picture. The McKeen Car actually had electric lamps but I believe they were pretty dim.
As far as modelling the oil lamps if you want to get into that level of detail, I would try using a piece of 3/32" clear styrene rod and applying some heat to stretch the rod into the shape of an oil lamp chimney. It would take a bit of experimentation to get the right size and shape but I'm sure it is doable.
Dave
I'm just a dude with a bad back having a lot of fun with model trains, and finally building a layout!
ATLANTIC CENTRALOil lamps
So I need LEDs shaped like oil lamps. I'm thinking mini oil lamps might be a tad impractical and hard to light.
SpaceMouse Did they light passenger cars and/or cabooses back then?
Did they light passenger cars and/or cabooses back then?
Oil lamps