Trains.com

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

When Were FM H16-44s and 15-44s Retired?

3650 views
11 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    December 2008
  • From: Heart of Georgia
  • 5,406 posts
When Were FM H16-44s and 15-44s Retired?
Posted by Doughless on Thursday, March 15, 2018 8:46 AM

Generally, railroads retired them before Geeps and 1st gen ALCOs.  Does anybody know of some really late hangers-on?

Thanks.

- Douglas

  • Member since
    October 2001
  • From: OH
  • 17,574 posts
Posted by BRAKIE on Thursday, March 15, 2018 9:45 AM

I recently discovered B&O used their H16-44s into '72.

Larry

Conductor.

Summerset Ry.


"Stay Alert, Don't get hurt  Safety First!"

  • Member since
    May 2004
  • 7,500 posts
Posted by 7j43k on Thursday, March 15, 2018 2:40 PM

UP's were traded in in 1966, with one making it to 1968.

 

Ed

  • Member since
    October 2008
  • From: Calgary
  • 2,047 posts
Posted by cx500 on Thursday, March 15, 2018 5:02 PM

CPR retired their fleet in 1975.  CN went in the late 1960s.  I think Mexico (Ch-P) may have been the last running any sort of fleet.

  • Member since
    December 2008
  • From: Heart of Georgia
  • 5,406 posts
Posted by Doughless on Thursday, March 15, 2018 5:39 PM

Thanks for the replies.  So far, that's a lot later than I would have thought since FM fell out of favor fairly quickly.

Keep up the good information.....

- Douglas

  • Member since
    August 2013
  • 3,006 posts
Posted by ACY Tom on Thursday, March 15, 2018 9:36 PM

PRR's FM Erie Builts were retired in 1962-3. The C-Liners lasted a bit longer, being retired in 1965. PRR's hood units did a bit better, with the H20-44's lasting till about 1966-7, and all the H16-44's lasting until 1967. The H24-66 Trainmasters lasted latest of all. They made it to the Penn Central merger in 1968, but were gone soon after. 

AC&Y H15-44 200 was traded to EMD for N&W units in 1968. H16-44's 201-203 as well as H20'44's 500-504 went to EMD in 1968 and 1969. H16-44 208 went to EMD in October, 1969. H16-44's 204-207 went to EMD in December, 1970. H20-44 505 went to Southwest Portland Cement in 1971.  Retirement dates of AC&Y's ex P&WV H20-44's 506-508 are not recorded, but they probably went around 1971. 

Tom 

  • Member since
    July 2006
  • From: Huntsville, AR
  • 1,251 posts
Posted by oldline1 on Friday, March 16, 2018 9:58 AM

I remember seeing N&W ex-Virginian H16-44 units in Norfolk as late as 1974.

oldline1

  • Member since
    June 2011
  • 404 posts
Posted by DavidH66 on Friday, March 16, 2018 12:17 PM

Not what you asked but the H10 and H12's lasted into the mid 1980s on the old Centeal Wisconsin, plus isn't there an operating one in Utah still?

  • Member since
    February 2015
  • 869 posts
Posted by NHTX on Friday, March 16, 2018 10:17 PM

   According to "H15-44 and H16-44---Fairbanks-Morse's Distinctive Road Switchers" by David R. Sweetland and Diesel Era (Withers Publishing), CNJ's H15-44s were the last to be retired in 1971 and sold for scrap 11/14/72.  As far as H16-44s, the MILW retired the last U.S. fleet in 1976.  Mexico's Chihuahua al Pacifico replaced theirs with GP-40-2s in 1982, and the last H16-44 to be retired in North America was Bosques de Chihuahua's 1961 built BCh 1000 which was retired in 1988 when the sawmill served by the carrier closed.

  • Member since
    May 2003
  • From: SE Michigan
  • 922 posts
Posted by fmilhaupt on Saturday, March 17, 2018 9:14 AM
The Monon repowered its pair of H15-44s with EMD prime movers in 1960, then retired them in 1968 and 1970.

-Fritz Milhaupt, Publications Editor, Pere Marquette Historical Society, Inc.
http://www.pmhistsoc.org

  • Member since
    September 2014
  • From: 10,430’ (3,179 m)
  • 2,311 posts
Posted by jjdamnit on Saturday, March 17, 2018 3:41 PM

Hello all,

Outside of Boulder, Colorado, there is an asphalt manufacturing plant that has an H16-44 that was used to shuttle cars and make up consists. 

This was used up until a few years ago when it was replaced by a track mobile.

Hope this helps.

"Uhh...I didn’t know it was 'impossible' I just made it work...sorry"

  • Member since
    June 2011
  • 404 posts
Posted by DavidH66 on Monday, March 19, 2018 12:24 AM

jjdamnit

Hello all,

Outside of Boulder, Colorado, there is an asphalt manufacturing plant that has an H16-44 that was used to shuttle cars and make up consists. 

This was used up until a few years ago when it was replaced by a track mobile.

Hope this helps.

 

 

Where was this, I was looking on Google maps and couldn't find it.

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

Users Online

There are no community member online

Search the Community

ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT
Model Railroader Newsletter See all
Sign up for our FREE e-newsletter and get model railroad news in your inbox!