Trains.com

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

Dating rolling stock

6344 views
16 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    February 2002
  • From: Mpls/St.Paul
  • 13,892 posts
Posted by wjstix on Wednesday, February 24, 2016 4:26 PM

Chris brings up the other side of the coin - having cars built during or before your time period is one thing, making sure they're lettered for your period is the other. Many of the models available for cars built in the 1920's or earlier are often wearing later paint schemes. Except for reefers, generally freight cars of the 1920's and earlier were very simple in their lettering. In the 1930's, railroads started to use their freight cars to advertise their new streamlined passenger trains ("Way of the Zephyrs" on CB&Q cars, or Santa Fe 'map' cars touting the Chief, Super Chief, El Capitan etc.), or high-speed freight service (Cotton Belt "Blue Streak").

Stix
  • Member since
    October 2008
  • From: Canada
  • 1,820 posts
Posted by cv_acr on Monday, February 22, 2016 10:12 AM

gregc

 

Freight car markings inlcude a built/re-built date.   A car built after the era you're modeling obviously couldn't have existed in your era.   See marking on right side of image.

 

Careful though, that's not the end of the story.

Look on the *left* side of the car, next to the weight information. That "HV 8-52" is a re-weigh date, with the "HV" representing a car shop doing the work. (CB&Q Havelock in this case). So this represents a car shopped or repainted in 1952, and the paint scheme, slogan and lettering likely bears no resemblance to its 1919 as-built appearance.

  • Member since
    February 2008
  • 2,360 posts
Posted by kasskaboose on Monday, February 22, 2016 8:42 AM

mobilman44

Hi,

I'm a stickler about not having any rolling stock/locos/autos on my layout past a 1960 build (or repaired) date.  For the vast majority of cars, its simply a matter of looking up the dates (almost always the last two digits of the year) on the side of the car.  There are often more than one - build date, plus repaint or repair dates.

Some generic or private use cars wayyy back when might not have a date so use your best judgement as to whether it fits or not.

 

Yes, I too am a stickler for finding realistic build dates.  Given that I model the early 1980s, I have cars from the 1950s to 1980s.  This fits within the 40-year NMRA rule for cars and offers a lot of variety for types of cars.  I love that some manufacturers put the build dates online which is different than many online sellers unless asked.

I even got an Athearn Genesis hopper in a set w/ a build date past my era.  Call me crazy, but I traded it in at a show for two cars suitable for my era. 

  • Member since
    November 2005
  • From: Utica, OH
  • 4,000 posts
Posted by jecorbett on Sunday, February 21, 2016 11:15 AM

gregc
 
Sojourner67
Looking for some info on rolling stock, as to what era they belong.

 

Freight car markings inlcude a built/re-built date.   A car built after the era you're modeling obviously couldn't have existed in your era.   See marking on right side of image.

 

I'm glad those built dates are really small and hard to read because that way I can easily ignore them if I want to put a piece of rolling stock on my layout that post dates my time frame.

  • Member since
    June 2007
  • 8,892 posts
Posted by riogrande5761 on Sunday, February 21, 2016 10:43 AM

It helps to memorize characteristics of rolling stock in different periods, but if you are lazy you can look at the dates printed on the sides of cars.  Yes, not always accurate but usually a quick and dirty way to tell.

Rio Grande.  The Action Road  - Focus 1977-1983

  • Member since
    February 2002
  • From: Mpls/St.Paul
  • 13,892 posts
Posted by wjstix on Sunday, February 21, 2016 12:53 AM

The most common house cars (boxcars, reefers, stock cars) would have been 40' long with 8.5' interior height - noticeably shorter than later 40' boxcars from the 1930's on, which would normally be 10.5' high. An early all-steel boxcar was the X-29 originally used by the Pennsylvania.

http://www.walthers.com/exec/productinfo/910-1710

However most boxcars would have woodsides, some with wood ends and roofs, some with steel ends and roofs. Some would have single-sheathing with exposed bracing:

http://www.walthers.com/exec/productinfo/910-2503

Some would have double sheathing:

http://www.walthers.com/exec/productinfo/279-6320

These examples all have steel underframes, but cars with wood underframes and truss rods would be common into the 1930's. Also 36' cars or even a few 34' cars would still be seen.

A tricky thing can be learning the lettering however. For example, the GN boxcar above may have built in the 1910's or 1920's, but that model is wearing the GN herald introduced in 1936, so would be wrong for a 1920's layout.

Stix
  • Member since
    January 2016
  • 30 posts
Posted by Sojourner67 on Saturday, February 20, 2016 2:21 PM

Ray Dunakin

When I saw the subject heading, "Dating rolling stock", the first thing that popped into my head was, "Somebody REALLY loves trains!"   :)

 

But seriously, lots of great info posted here. 

 

 

 

Ha ha, yes I agree, didn't know quite how to word the header! Yes, lots of info, thank you everyone!

  • Member since
    January 2006
  • From: Sandy Eggo, CA
  • 1,279 posts
Posted by Ray Dunakin on Saturday, February 20, 2016 2:06 PM

When I saw the subject heading, "Dating rolling stock", the first thing that popped into my head was, "Somebody REALLY loves trains!"   :)

 

But seriously, lots of great info posted here. 

 

 Visit www.raydunakin.com to see pics of the rugged and rocky In-ko-pah Railroad!
  • Member since
    January 2004
  • From: Canada, eh?
  • 13,375 posts
Posted by doctorwayne on Saturday, February 20, 2016 1:06 PM

By the mid-'20s, 50' boxcars were becoming much more common - most were single- or double-sheathed wood cars (steel framing with wood sheathing).


Some useful books (not restricted to the '20s though) would include Ted Culotta's "Steam Era Freight Cars Reference Manual, Volume One", which deals with box and automobile cars.  Lots of photos and historical background info.
"Steam Era Freight Cars Reference Manual, Volume Two", by the same author, covers all sorts of tank cars.

Also useful are Richard Hendrickson's "Focus on Freight Cars, Volume One", which covers single sheathed box and automobile cars, and "Focus on Freight Cars, Volume Two", dealing with double sheathed box and automobile cars.

Some of the cars covered in these books are available as models, but many provide opportunities for scratchbuilders and kitbashers, too.

Accurail offers quite a few cars suitable for a '20s era layout, but since freight cars lasted for decades, not all of their paint schemes are necessarily appropriate for that period.  Research on the prototypes can help you determine which are correct.

An Accurail USRA-type reefer, modified, then painted and lettered to represent the appearance common in the '20s.  These cars were modernised starting in the '30s (my modelling era) but that programme continued into the '50s:

This photos shows some of the modifications:

...and the finished car:

...an Accurail USRA hopper.  These were first built in 1918, but there were thousands of copies built in subsequent years.  This car has a built date of 1919, and the only change I've made was to add a re-weigh date (the slightly cleaner small lettering at the bottom left of the car) to better-suit my era.  I'm not sure, but the CT (indicating that the car was financed and owned by the Columbia Trust when built) may be incorrect for my era, but it would be appropriate for yours:


Another good source for cars of that era are the old Train Miniature cars (now Walthers).  You should be able to find them at train shows for very reasonable prices. 
Here's an early (1916) NYC automobile car.  In the mid-'30s, these cars were re-built as steel box- and automobile cars, but mine hasn't yet been one of them.  This is the original car showing the modifications needed to match a photo in Culotta's first book:

...and the painted and lettered version, which is a close match to the photo:

Likewise, Model Die Casting offered some old time cars which could be suitable.  This one started as the red and blue boxcar seen here:

I built a new roof...

...and ends...

...then modified the underframe...

...then added a few details to the sides:

After painting and lettering, I had a car which is a very close match to a photo in Ted's book.  The prototypes, built between 1922 and 1926, totalled almost 15,000 cars, and many lasted into the '50s:

Model Die Casting also offered examples of the 50' automobile cars which I mentioned.  I removed this car's deep fishbelly sidesills, stripped off the factory paint and lettering, then added metal sill steps and grabirons.  The road name lettering and herald is dry transfers intended for a hopper, while the dimensional data is decals.  This car is a stand-in (not totally accurate) for two groups of Mopac cars built in 1926:

Another source of reasonably-priced '20s era cars is Bowser, and specifically their Pennsy hoppers.  This one is an H21, with clamshell-type hopper doors:

This one represents an H21A, with regular hopper doors:

There are several others available, but some have more modern paint schemes, too.  For your era, the version shown is appropriate, as would be the same, but without the circle/keystone herald.

Wayne

  • Member since
    September 2003
  • From: California - moved to North Carolina 2018
  • 4,422 posts
Posted by DSchmitt on Saturday, February 20, 2016 12:53 PM

I tried to sell my two cents worth, but no one would give me a plug nickel for it.

I don't have a leg to stand on.

  • Member since
    September 2003
  • From: Southeast Texas
  • 5,449 posts
Posted by mobilman44 on Saturday, February 20, 2016 12:01 PM

Hi,

I'm a stickler about not having any rolling stock/locos/autos on my layout past a 1960 build (or repaired) date.  For the vast majority of cars, its simply a matter of looking up the dates (almost always the last two digits of the year) on the side of the car.  There are often more than one - build date, plus repaint or repair dates.

Some generic or private use cars wayyy back when might not have a date so use your best judgement as to whether it fits or not.

ENJOY  !

 

Mobilman44

 

Living in southeast Texas, formerly modeling the "postwar" Santa Fe and Illinois Central 

  • Member since
    August 2013
  • 3,006 posts
Posted by ACY Tom on Saturday, February 20, 2016 10:28 AM

The first steel cars were built just before 1900. Most early all-steel freight cars were hoppers. In the mid-teens, some progressive and wealthy railroads like the PRR began to introduce steel boxcars such as the PRR X25. By the 1920's, steel boxcars were becoming more popular; but many composite boxcars were being built for railroads all over the country. The ARA "standard" car (related to PRR's X29) was introduced in the mid 1920's and began to gain wide acceptance, although many composite cars remained in service until well after WWII.

Gondolas also changed from composite to all steel around the same time that boxcars did.

Tom 

  • Member since
    September 2003
  • From: California - moved to North Carolina 2018
  • 4,422 posts
Posted by DSchmitt on Saturday, February 20, 2016 10:03 AM

I tried to sell my two cents worth, but no one would give me a plug nickel for it.

I don't have a leg to stand on.

  • Member since
    July 2009
  • From: lavale, md
  • 4,678 posts
Posted by gregc on Saturday, February 20, 2016 8:53 AM

Sojourner67
Looking for some info on rolling stock, as to what era they belong.

Freight car markings inlcude a built/re-built date.   A car built after the era you're modeling obviously couldn't have existed in your era.   See marking on right side of image.

greg - Philadelphia & Reading / Reading

  • Member since
    September 2003
  • From: California - moved to North Carolina 2018
  • 4,422 posts
Posted by DSchmitt on Saturday, February 20, 2016 8:38 AM

Found this site  HO scale models   http://designbuildop.hansmanns.org/2013/01/16/1920s-era-freight-car-model-guide/

 

Westerfield provides era information on their kits and sell ORER  (very useful info) on disk. Go to their store link from:  http://www.westerfieldmodels.com/

 

 

 

I tried to sell my two cents worth, but no one would give me a plug nickel for it.

I don't have a leg to stand on.

  • Member since
    September 2003
  • From: Omaha, NE
  • 10,621 posts
Posted by dehusman on Saturday, February 20, 2016 8:23 AM

There is no one comprehensive document.  There are lots of books on railroad equipment and histories of different types of cars.

In the 1920's there would be early steel cars, wood sided cars and some composite cars.  New boxcars would be steel and 40 ft.  Older boxcars would be wood and 36-40 ft.  Hopper cars would be mostly steel, 50-70 ton cars.  Gons would mostly be in the 40-46 ft range steel or composite (steel underframes with wood sides.)  Tank cars would be riveted and it 10k gal and under range.  The cars could have vertical brake staff's (horizontal wheel), geared handbrakes (vertical wheel) or a brake lever.  All the cars would have air brakes and all the cars would have standard safety appliances (grab irons) and all th cars would have standard lettering.  Covered hoppers would be extremely rare  Flat cars would be in the 36-50 ft range.

Dave H. Painted side goes up. My website : wnbranch.com

  • Member since
    January 2016
  • 30 posts
Dating rolling stock
Posted by Sojourner67 on Saturday, February 20, 2016 8:16 AM

Looking for some info on rolling stock, as to what era they belong. I'm currently roughly in the 1920's era. So do box cars with the brake wheel on the end of the car fit, or do I stay with the brake wheel extended over the roof line? Wooden only, or steel? And what about tank cars, when did they evolve? I'm guessing anything over 40' didn't exist? Right now I'm running a Heisler as my main motive power. Thanks.

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

Users Online

There are no community member online

Search the Community

ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT
Model Railroader Newsletter See all
Sign up for our FREE e-newsletter and get model railroad news in your inbox!