Trains.com

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

Alco RS type locomotive

2289 views
7 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    December 2001
  • From: San Jose, California
  • 3,154 posts
Posted by nfmisso on Saturday, March 6, 2004 6:48 AM
QUOTE: Originally posted by jschuknecht

.... RSDs were 3 axle trucks, all axles powered, and the middle one was offset slightly.

Actually, the axles toward the center of the locomotive where offset away from the middle one compared to the RSC truck. The spacing between the center axle, and the one closest to each end of the locomotive is the same on the RSC3 and RSD4/5. Which lead to the possiblity of bashing some RSC3 trucks from RSD trucks.........
Nigel N&W in HO scale, 1950 - 1955 (..and some a bit newer too) Now in San Jose, California
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Friday, March 5, 2004 9:54 PM
Interesting tidbits:

Alco didn't refer to their offerings as FA's, PA's, and RSD's initially; they used their own scheme such as DL600-B (the RSD-15). The railfans used the clearer scheme so much that they ended up adopting it.

In deisel engine terms, A, B, & C are supposed to refer to the powered axles in the trucks, so that a B-B locomotive has two trucks with two powered axles in each, while A-1-A - A-1-A would designate an engine riding on six axles total, with each truck having a powered axle (A) on either side of an unpowered (1) axle. The C-C arrangement is supposed to denote an engine riding on six axles, with three powered axles in each truck.

So, the RSC's are an anomaly because the C denotes the unit with an unpowered third axle in each truck, contrary to the above. One might reasonably expect the whole situation to be backwards of what it is, with the RSC's being the all-powered-axles version.
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Thursday, March 4, 2004 3:22 PM
Yes, RSs were 2 axle trucks, both axles powered. RSCs had 3 axle trucks with an unpowered middle axle. And RSDs were 3 axle trucks, all axles powered, and the middle one was offset slightly.

---jps
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Friday, February 6, 2004 3:25 PM
I think you're right.
  • Member since
    January 2003
  • From: indiana
  • 792 posts
Posted by joseph2 on Friday, February 6, 2004 3:19 PM
I think the C in RSC means an unpowered axle.
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Friday, February 6, 2004 3:12 PM
RSD and RSC=six axles.
  • Member since
    December 2001
  • From: San Jose, California
  • 3,154 posts
Posted by nfmisso on Friday, February 6, 2004 3:07 PM
Correct; Alco call thier switchers S-_; 4 axle road switchers RS-__; cab freight units: FA-_ and FB-_; cab passenger: PA_ and PB_.

I don't know what the C and D in RSC and RSD stood for.
Nigel N&W in HO scale, 1950 - 1955 (..and some a bit newer too) Now in San Jose, California
  • Member since
    January 2004
  • From: Reedsburg WI (near Wisconsin Dells)
  • 3,370 posts
Alco RS type locomotive
Posted by Noah Hofrichter on Friday, February 6, 2004 10:26 AM
Could andbody tell me what the RS stands for in Alco RS type locomotives[?] I kinda thought Road Switcher, but I wasn't sure.

thanks in advance,
Noah[:p][:)][:p]

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

Users Online

There are no community member online

Search the Community

ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT
Model Railroader Newsletter See all
Sign up for our FREE e-newsletter and get model railroad news in your inbox!