I'm a believer in Sculptamold, too. Great stuff, easy to use. I've also used plaster cloth.
Both on foam, and since I used L-girder construction, I guess I'm doing everything wrong...
For switch machine mounting, my construction technique makes it pretty straight-forward. Below the foam, I have a layer of Home Depots el cheapo paneling. It's screwed to the l-girders and gives it extremely strong structural integrity. Switch machines can mount directly to the paneling below.
For pics, see http://www.ironpeng.com/nscalelayout/nscalemain.html
Mike Tennent
Lefty
TheK4Kid wrote: jecorbett wrote: My question with foam is how to install undermount turnout motors. You can cut a hole or area in the foam for the Atlas undermount, run wiring up from the bottom of the foam, set your switch machine down in place, and cut a small piece of foam(from scrap) to set in place on top of it.Works great, just leave enough room for the arm to stick up through.
jecorbett wrote: My question with foam is how to install undermount turnout motors.
My question with foam is how to install undermount turnout motors.
And MR just ran a small blurb on using heavy duty hook and loop tape, otherwise known as Velcro, to hang motors under a foam deck. Apparently the author had success and it makes it a lot easier if you need to change out a switch machine.
I use Pecos (with the built in spring) myself, so no need to mount or hide anything.
It takes an iron man to play with a toy iron horse.
jecorbett wrote:My question with foam is how to install undermount turnout motors. I've seen layouts with traditional wood support for the track and foam scenery behind it but others used foam as the base for the track. Atlas undermounts don't have a long enough pin for use with foam board. I assume whatever turnout motors you use has to be mounted in some fashion to the wood benchwork. What are the methods used by foam boarders for undermount turnout motors and what brands are used.
My question with foam is how to install undermount turnout motors. I've seen layouts with traditional wood support for the track and foam scenery behind it but others used foam as the base for the track. Atlas undermounts don't have a long enough pin for use with foam board. I assume whatever turnout motors you use has to be mounted in some fashion to the wood benchwork. What are the methods used by foam boarders for undermount turnout motors and what brands are used.
jecorbett wrote: My question with foam is how to install undermount turnout motors. I've seen layouts with traditional wood support for the track and foam scenery behind it but others used foam as the base for the track. Atlas undermounts don't have a long enough pin for use with foam board. I assume whatever turnout motors you use has to be mounted in some fashion to the wood benchwork. What are the methods used by foam boarders for undermount turnout motors and what brands are used.
My layouts are generally narow (12" to 24" max), so I don't bother with switch machines. The throw rod spring on my Peco switches is more than sufficient and accesable. In the rare case where a switch machine MIGHT be necessary, I'd just screw it to the 1/4" plywood that I use as an underlayment to the foam. Some foam modelers who don't use any plywood under the foam just glue a Torotise switch machine to a pad of 1/8" Msonite, and glue that to the underside of the foam. I've seen foam layouts with Torotii that have been glues in place for 8-10 years without any problems, and they see heavy use.
Ray Breyer
Modeling the NKP's Peoria Division, circa 1943
Thank you
Rich
Metro Red Line wrote: orsonroy wrote: And don't bother with the spackle; the whole point of using foam is so you don't HAVE to use any sort of plaster.Start using it, and you might as well have completely traditional hardshell scenery. Huh? I thought the point of using foam is that you don't have to use wooden contours and chicken wire.WS products suggest a foam/hardshell combo, and I've seen many club layouts that cover foam with hydrocal. I guess I'm wrong then. Oh well, guess I have to quit the hobby now.
orsonroy wrote: And don't bother with the spackle; the whole point of using foam is so you don't HAVE to use any sort of plaster.Start using it, and you might as well have completely traditional hardshell scenery.
And don't bother with the spackle; the whole point of using foam is so you don't HAVE to use any sort of plaster.Start using it, and you might as well have completely traditional hardshell scenery.
Woodland Scenics is a company that's trying to make money. They suggest using a lot of their own products in an effort to sell you more stuff. Nothing wrong with that, but most of what they suggest is overkill.
There have been a LOT of threads on foam-based layout construction on this forum (and others). I've personally built four home layouts that were foam based (two for me and two for others), as well as 20 or so Ntrak modules that were foam-based, so I have a lot of experience with the medium, as well as lots of biases.
When you're using form for a modular layout, light weight is the key, and is where foam shines. There's really no acceptable substitute to foam when you have to schlep around a bunch of modules all over the countryside.
When you use foam for a home layout, especially a linear walkaround, shelf-style layout, then ease of construction is where foam comes into play. Ease of construction equates to making things effective, easy, cheap and FAST, while keeping the layout structurally sound. Adding layers of plaster over foam, whether it be spackle, plaster-dipped towels, or plaster cloth, adds more to the layout in terms of time, effort and money, and it's not generally needed. You've already got the foam down and contoured, so why bother adding a hardshell layer to it? What's the added value? More realistic terrain? Spend a little more time contouring the foam, and it'll be as good as the plaster layer. A "hard and strong" shell over the foam to protect it? Nope. Foam is more dent-resistant than plaster. Here's a test: smash a 16 oz hammer into a layer of foam as hard as you can, and do the same to a hardshell layout. With the foam, you'll end up with a dent in the layout the size of the head of the hammer. With the hardshell layout, you'll likely go all the way through the layout into the supports below, and the hole will be huge.
Traditional layout construction (L-girders and hardshell) has been around for a long time, and does work well, especially for spaghetti bowl layouts. But it takes forever to build, is expensive, and doesn't give you anything approaching a finished-looking layout for years. Foam-based layouts are cheaper and faster to build, and allow you to start running trains in a minimum of time. If you're modeling the Midwest like me, you can have a semi-finished scenic base in a matter of hours, not months. Even if you're not modeling the Midwest, you can still slap down a layer of tan paint and a little ground foam to give the whole layout a finished appearance while you add the more complex scenery at your leisure.
Finally, not many people talk about the mess of hardshell layout construction. Adding plaster to a layout is time consuming, partially because of the prep and cleanup times involved. Nobody bothers to factor in the time required to gather your supplies, tools, water and drop cloths while adding plaster, nor do they factor in cleaning up once you're done. With foam-based scenery, all I need is a sanding block and a vacuum cleaner. On my last layout (12x25 triple deck) I contoured the scenery for about half an hour a day after work. It took me about five minutes to vacuum up the mes I'd made, and I achieved steady progress quickly. If I was using hardshell, I'd have had to wait for weekends when I had more time available, since I would have had to have made a deliberate effort to slap down the plaster. The all-foam technique was less intense and more forgiving of my time, allowing me to actually progress much more quickly (a real plus when you've got two small children in the family!)
So don't be a slave to what the manufacturers are telling you, or to tradition. Experiment and think out of the box. With a little effort, critical thinking, and thinking about things "sideways" you can achieve the same end goals without just following in someone's footsteps.
It depends on the size of the gap and whee it is. If it's a fairly large gap, I use Great Stuff foam sealant. If it's a small gap, I use latex caulk (which I use to lay track, and I lay track before I scenic the foam). If the gap is in a decent place for one, I just carve it into a stream or drainage ditch.
brkracing wrote:What are you using to fill in the seams of the blue foam insulation board? I had to piece two togetther and have a seam to fill. Thanks Rich
What are you using to fill in the seams of the blue foam insulation board?
I had to piece two togetther and have a seam to fill.
Thanks
Sometimes nothing. Sometimes the ground goop will do it. For larger gaps you can cut strips of the foam. Most plaster will do the job. Plaster cloth is recomended but is expensive over kill.
On my layout. I count on the ground goop or use the gaps as starta layers in the rock formations.
By the way, welcome to the forum.