Modeling the Reading Railroad in the 1950's
Visit my web site at www.readingeastpenn.com for construction updates, DCC Info, and more.
QUOTE: Originally posted by capt_turk I'm using a Digitrax DB150 command station, a DT400, A DT400R, UR91,UR90, and a NCE PB-110a. I found that unplugging the DT400 from the UR90 has seemed to fix the problem. I tried unpowering the whole system. That didn't make any difference. I've been using this complete system for several days and everything has worked fine till this afternoon.
QUOTE: Originally posted by rrinker Those older MRC decoders only support the limited Register Mode programming. Digitrax systems can program in Paged, Direct, Ops, or Register mode - so you have to pick the right one depending on what the decoder supports. The Command 2000 as far as I know would only program in Register mode, although that should be able to set the address on a Digitrax decoder. --Randy