GLUE

[claycts]

OK, Elmers Carpenter wood glue it is! I cheat on painting wood kits I make my own stains using the pigments from my company.
Thank you for the feedback.
George P.

[orsonroy]

I'll second the use of wood glue for wood kits (applied sparingly with a toothpick). ACC really doesn't work at all on wood, unless you either drench the work with it or seal the wood, neither of which produces a really dependable joint (I know; I've tried to make it work). Old Ambroid is too gooey for me, except for very specific applications.

[Anonymous]

Campbell kits are mostly wood. I use carpenters wood glue (white glue on steroids) for the wood parts and solvent based paint to avoid warping the parts. Pour out a pool of glue and use it till it skins. Pour another pool. Soft drink "to go" lids from fast food places make good containers for this.

[ham99]

I use Faller Super Xpert for plastics. Needle type dispenser.

[oleirish]

I use CA gap filling , a small old brush,and toothpicks. and a cement that is used for model car windshelds for the windows,on my kits.

JIM

[claycts]

THanks guys, I will make a trip to the hobby lobby they have all that stuff.

[rrinker]

Ambroid's still around. White glue works well on wood-wood joints. You can use CA but the trick there is to apply a thin coat to both pieces and let it dry. Then apply a small amount and join the parts.

--Randy

[bogp40]

I also second the Ambroid. Another good choice is Testor's Fuel Proof, dries clear, slightly flexable and good initial tack.
Bob K.

[tommyr]

Thats all I ever use. Works for me. Have fun with your Campbell kits.
Tom

[claycts]

Years ago I used AMBROID glue for wood, worked ok. What is the new stuff on the block? I have 12 Campbell kits (darn ebay)
Thanks Folks
George P.