Trains.com

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

N Scale Sectional Track - Curve Radius

1791 views
6 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    January 2002
  • From: Loudonville, NY
  • 776 posts
N Scale Sectional Track - Curve Radius
Posted by Benjamin Maggi on Thursday, February 17, 2005 9:24 AM
Does any manufacturer make curved track in sections that are tighter than 9 3/4 inches in radius? I am planning on a trolley layout that has a 9 3/4 loop and inside a loop around 7 3/4" radius. I can use flextrack, and have before, but for ease and smoothness would like to know if smaller stuff is available. I don't have a walthers catalog handy, so I cannot check, but brand name isn't important. Nor is detail. Even European track with metric measurements are okay, as long as the curve fits inside the 9 3/4" loop. Thanks. Ben

Modeling the D&H in 1984: http://dandhcoloniemain.blogspot.com/

  • Member since
    August 2003
  • From: Midtown Sacramento
  • 3,340 posts
Posted by Jetrock on Thursday, February 17, 2005 9:56 AM
Flex track would probably be the way to go--I think 9-3/4" is the narrowest standard curve in N. Flex is a better bet anyhow, for tight curves.
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Thursday, February 17, 2005 10:44 AM
The smallest I've seen is 9-3/4 and I don't think there's anything smaller.
  • Member since
    September 2003
  • From: California - moved to North Carolina 2018
  • 4,422 posts
Posted by DSchmitt on Thursday, February 17, 2005 2:13 PM
There used to be 7-1/2" radius available from an European company. I don't think Walthers has it anymore.

A search of sites specializing in European trains might locate it.

I tried to sell my two cents worth, but no one would give me a plug nickel for it.

I don't have a leg to stand on.

  • Member since
    January 2002
  • From: Loudonville, NY
  • 776 posts
Posted by Benjamin Maggi on Thursday, February 17, 2005 7:02 PM
Thanks. I will check with a European importer that I know. Ben

Modeling the D&H in 1984: http://dandhcoloniemain.blogspot.com/

  • Member since
    December 2004
  • From: Upstate New York
  • 27 posts
Posted by flick on Thursday, February 17, 2005 9:19 PM
QUOTE: Originally posted by scoobster28

Does any manufacturer make curved track in sections that are tighter than 9 3/4 inches in radius? I am planning on a trolley layout that has a 9 3/4 loop and inside a loop around 7 3/4" radius. I can use flextrack, and have before, but for ease and smoothness would like to know if smaller stuff is available. I don't have a walthers catalog handy, so I cannot check, but brand name isn't important. Nor is detail. Even European track with metric measurements are okay, as long as the curve fits inside the 9 3/4" loop. Thanks. Ben


Kato Unitrack has a relatively new piece that's smaller than 9 3/4, but not by much! Here's the info from their website.

Peter

20-170 216mm (8 9/16") Radius 45º Curve Track [4 pcs]
• 8 pieces make a circle.
Warning: This radius is too tight for 6-axle locomotives.
We recommend it for industrial trackage or trolley routes.

20-171 216mm (8 9/16") Radius 15º Curve Track [4 pcs]
• 24 pieces make a circle.
Warning: This radius is too tight for 6-axle locomotives.
We recommend it for industrial trackage or trolley routes.
  • Member since
    January 2004
  • 1,634 posts
Posted by pbjwilson on Thursday, February 17, 2005 10:14 PM
Check www.reynaulds.com - They have european track w/small radii.
Look under Fleishmann - N track

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

Users Online

There are no community member online

Search the Community

ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT
Model Railroader Newsletter See all
Sign up for our FREE e-newsletter and get model railroad news in your inbox!