marctje dehusman I understand you, your English is 1000 times better than my Dutch (which is about zero). If you installed a crossover from the yard lead to the main you could cut the run to engine facilites by about 2/3 and it wouldn't affect the reverse loop at all. For some reason the image got cropped but you probably can get the idea. At the location in red, you could put a crossover to the main or a crossover to the engine lead with a diamond on the main. I had already thought of that, so i tried to compensate this by adding a crossover and a three way turnout to the facility Now i can even spot a tank- or a boxcar next the dieselpump Check the new plan uitgewerkt aangepast plan bovenbaan met papierfabriek in het midden aangepast diesel facility by Marc De Groulard, on Flickr
dehusman I understand you, your English is 1000 times better than my Dutch (which is about zero). If you installed a crossover from the yard lead to the main you could cut the run to engine facilites by about 2/3 and it wouldn't affect the reverse loop at all. For some reason the image got cropped but you probably can get the idea. At the location in red, you could put a crossover to the main or a crossover to the engine lead with a diamond on the main.
I understand you, your English is 1000 times better than my Dutch (which is about zero).
If you installed a crossover from the yard lead to the main you could cut the run to engine facilites by about 2/3 and it wouldn't affect the reverse loop at all.
For some reason the image got cropped but you probably can get the idea. At the location in red, you could put a crossover to the main or a crossover to the engine lead with a diamond on the main.
I had already thought of that, so i tried to compensate this by adding a crossover and a three way turnout to the facility Now i can even spot a tank- or a boxcar next the dieselpump
Check the new plan
uitgewerkt aangepast plan bovenbaan met papierfabriek in het midden aangepast diesel facility by Marc De Groulard, on Flickr
I made a new plan where i changed the yard with 2 crossovers so the train can go from the dieselhouse to the yard. In the yard i have the 2 first tracks for container loading and unloading, than 2 tracks for setting out cars for the papermill and coldstorage on the peninsula and 2 tracks for inbound and outbound trains.
What do you all think about this plan
uitgewerkt aangepast plan bovenbaan met papierfabriek in het midden aangepast diesel facility en nieuwe yard by Marc De Groulard, on Flickr
Union Pacific and Amtrak in Belgium
Dave H. Painted side goes up. My website : wnbranch.com
marctjeI hope you understand me, Englisch is not my mother language but i'm dutch speaking.
I am understanding you perfectly. This has been an interesting discussion. Your space is about the same as mine, and you have me thinking.
-Kevin
Living the dream.
Dear Dehusman
I'ts like a large dogbone but with two reverse loops one on each deck one above the other on practicely the same place, this is to reduce de cabeling to the reverse module. On the diesel facility is indeed no conection to the yard and this is for enable a reverse loop on that side of the layout. Regarding the running of trains, i'm a lone star for this project, it's a private layout in a chamber of a trainclub next to the grand room where the club is building a Belgium layout with Antwerp as a focal point and in the era of 1950 to 1980, one of the eyecatchers is the Antwerp Central Station, one of worlds elegant station buildings.
For my layout i'm running single, so i can run a train ore two on the mainline in continius running and i can switch the papermill from the yard without interfearing the main line.
I hope you understand me, Englisch is not my mother language but i'm dutch speaking.
It appears the operation is a "dogbone", up out of staging to a big reversing loop on the upper level.
There doesn't appear to be a place to meet two opposing trains other than in the yard, that means pretty much the trains will have to operate all the same direction when they go around the return loop or yu will have to operate trains one at a time.
Is the facility in the left hand return loop the engine facilities? Normally the engine facilities are situated so it's easy to get between the yard and the engine facilities. Not so much on your layout, it looks like you have to go 1/3 the way around the layout on the main to get to the engine facilites, somewhat awkward.
Mark B Perhaps make the access to your peninsula using a wye . That way trains traveling in either direction can switch it. Just my thought. Mark B.
Perhaps make the access to your peninsula using a wye . That way trains traveling in either direction can switch it. Just my thought.
Mark B.
This idea was already in my head when a start to drow the plan, but because the grandeur of the papermill factory i have to put my rails on the rights side of the buildings. the direction of the train is not that inportant because all the industrie on de peninsula comes and go to the yard who is clear from the main.
I have changed my plan for the upper part of my layout, now i don't have anymore double switch turnouts and reduce the upper loop with one turnout what would make wirring more simple with less problems. You can see the new plan below, please let me now youre thoughts.
uitgewerkt aangepast plan bovenbaan met papierfabriek in het midden by Marc De Groulard, on Flickr
that's no problem, the corners are 80 cm/31,49 inch depth
It seems to me the corners might be a challenge to reach.
here's a update of work in progress
workdesk
workdesk by Marc De Groulard, on Flickr
left side with start incline
left side and start incline by Marc De Groulard, on Flickr
central view
central view with incline by Marc De Groulard, on Flickr
right side with end of inline
right side with end of incline by Marc De Groulard, on Flickr
general overview
overzicht panorama by Marc De Groulard, on Flickr
Hallo allemaal,
marctjezijn jullie van plan om naar Nederland te komen?
In 2019 hebben we Maastricht, Valkenburg en Brunssum bezocht.
De oudoom van mijn vrouw ligt begraven op de Amerikaanse militaire begraafplaats in Maastricht.
In 2022 bezochten we Valkenburg (wielerwedstrijd Amstel Gold), daarna naar Liegè (wielerwedstrijd Liegè-Basgogne-Liegè) en Huy (wielerwedstrijd Flèche Wallonne).
Valkenburg is een prachtige stad die we graag bezoeken.
We reisden met de trein naar alle plaatsen.
Ik hoop dat dit helpt.
"Uhh...ik wist niet dat het 'onmogelijk' was, ik heb het gewoon laten werken...sorry"
Translation- -
Hello All,
marctjeAre you planning to come to Holland?
In 2019 we visited Maastrict, Valkenburg and Brunssum.
My wife's great-uncle is buried in the American military cemetery in Maastricht.
In 2022 we visited Valkenburg (Amstel Gold bicycle race) then to Liegè (Liegè-Bastogne-Liegè bicycle race) and Huy (Flèche Wallonne bicycle race).
Valkenburg is a beautiful city we enjoy visiting.
We traveled everywhere by train.
Hope this helps.
(Ik hoop Zandvoort te bezoeken om getuige te zijn van de overwinning van Max Verstappen!)
"Uhh...I didn’t know it was 'impossible' I just made it work...sorry"
Thanks for all the ideas. I think i'm going to redraw the yards in the stagging to avoid any problems with the turnouts.
All the tables are 80 cm depht and 90 cm above the floor.
Why i'm building single track on the incline? this is because when i move to our other place i have a indoor garagebox of 28m². Now i'm trying to build something i can enjoy and in time re-use in the box with a minimum los of wood (the prices in europe are very high). in the box i'm planning a double deck layout with a hellix (but this is still future).
So i try to keep this layout simple with lots of fun and train running (most of the time alone).
hallo
tof dat je Nederlands leert. zijn jullie van plan om naar Nederland te komen?
Great that youre learning dutch. Are you planning to come to Holland?
Ik bouw in HO. I'm building HO
Just make sure your walkways are at least 76.2 cm.
Hi marctje,
I assume the measurements are in CMs?
You might have a bit of difficulty reaching into the turnouts at the top of the 'shadow station' (above the center peninsula) with the tight space between the two levels. I would do a cardboard mock up of that area before starting construction.
Cheers!!
Dave
I'm just a dude with a bad back having a lot of fun with model trains, and finally building a layout!
BigDaddy Would we call the Shadow Station..........Staging?
Would we call the Shadow Station..........Staging?
I agree with what Dave H (dehusman) says about the long single track between levels. Also, if you are using something to light up indicators showing switch position in your shadow yards then I think you are fine. If not, I agree with Dave's other statement about the arrangement of your switches. With such tight clearances between the lower and upper level it could be really difficult to see switch position, much less change it. I assume you have a plan for that?
Mike
The major issue I see is the hugely long single track down into stagin/shadow trackage. I would suggest double tracking it so that you can be bringing a train "up" at the same time you are sending a train "down".
With the shadow yard ladders arranged the way they are, switches to the rear, a train on a front track will obscure the view of the switches to the rear. An arrangement that has the switches towards the front will allow visual verification of switch postion and trains in the clear. There are also alternative switch arrangements (diamond shaped yard) that allow for all the tracks in the yard to be near the same length.
Henry
COB Potomac & Northern
Shenandoah Valley
Welkom!
Je Engels is redelijk goed.
Mijn vrouw heeft familie in Nederland. We zijn Nederlands aan het leren.
Welke schaal maak je, OO?
(Welcome!Your English is really good. My wife has family in the Netherlands. We are learning Dutch. What scale?)
snjroyThe space between your levels is tight...
- -Er is weinig ruimte van bovenlaag naar onderlaag.
I don't see any problems with your track plan- -Het baanplan kent geen fouten.
Please send photos of your progress- -Stuur alstublieft foto's van uw vorderingen.
Doe-Doei!
Ok. No need to apologize, your English is fine. The space between your levels is tight...
Simon
Thanks for the comments
My firts objective is to run trains with a purpose, thats why i dind make a continues run on the upper level. my passenger trains go only once in the station and head back to stagging on the middle penisula. the upper peninsula is dedicated to, in firts place to intermodal traffic, and second for boxcars.
The height of the two layers is about 16cm ore 6,29 inch. youre right about the track between the two levels, this as a grade of 2%.
this layout is being build to work with max. 2 people and will be dismanteld in time (about 4 to 8 years) to move to an other location.
I also want to say sorry for my englisch i'm dutch speaking and living in Belgium
Hello Marc. From what I can undestand, the first picture refers to a lower level, and the second, the main level. And the two are connected on the right side. Correct?
If this was my layout, I would allow continuous running on the main level, which can be easily done by creating a return loop on the bottom right section.
About the two yards in your peninsulas, I see that you would need to do a lot of backing-up operations to get cars in or out. That's looking for trouble, especially in the curves. I would create more escape tracks (you have already two, I would do more).
Anyway, that's my two-cents worth.
Hi everybody
as you all now i'm starting a new layout and here are the plans for the shadowstation and the layout.
this is the shadow station
te gebruiken grondvlak club niveau 0 enkel stijgspoor goed plan lichte platen by Marc De Groulard, on Flickr
this is the layout
grondvlak 15+ juiste breedte 70 cm Westmalle piko a enkel spoor met diesel huis by Marc De Groulard, on Flickr