Trains.com

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

Petrus Feed And Seed

1591 views
9 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    November 2015
  • 723 posts
Petrus Feed And Seed
Posted by UNCLEBUTCH on Friday, January 17, 2020 3:39 PM

 Anouther HO scratchbuilt, inspired by imagination. I'm not happy with the weathering, but can;t put my finger on whats wrong. Any suggestions ?

 

 Thanks for looking

 

 

 

 

  • Member since
    December 2015
  • From: Shenandoah Valley
  • 9,094 posts
Posted by BigDaddy on Friday, January 17, 2020 4:01 PM

Weathering is a matter of taste as well as technique. We may not have the same tastes.

Even though the signs are weathered, they look to bright.  The metal building looks fine to me, but the back building has too much rust on the doors. It's a thriving business and people look right at those doors when they drive in.  It's too run down.  The door to the left of the rusty doors look perfect.  I also think you were too heavy handed with the rust on the Wayne seed building.

Parts of the roof look clean, parts look dirty.  It would have been better is an individual panel or two looked clean, like it was recently replaced.

Henry

COB Potomac & Northern

Shenandoah Valley

  • Member since
    February 2018
  • From: Flyover Country
  • 5,557 posts
Posted by York1 on Friday, January 17, 2020 4:14 PM

You may be like me, Unclebutch.  Too critical of your own work.

It looks great to me.  You've done a good job.

York1 John       

  • Member since
    February 2017
  • 189 posts
Posted by Deane Johnson on Friday, January 17, 2020 5:02 PM

I would echo what Big Daddy posted relative to the doors.  For me, the rust running down there is far too heavy.  I have never seen that much rust from the small amount of metal in those brackets.

That rust sort of takes away from the rest of the weathering.  I'd have to get it under control before I could judge the rest of the model.

All in all, it's a great model and I wish I were doing that quality work.

Deane

  • Member since
    January 2004
  • From: Canada, eh?
  • 13,375 posts
Posted by doctorwayne on Friday, January 17, 2020 8:12 PM

That's a nice looking facility, but I have to agree with the previous posters:  a little too heavy on the rust effects, and perhaps a little too much dirt on the walls, especially at left, in the last photo.  That roof overhang would shield that wall rather well, unless a lot of weather came from that side. 
Dirt and rust usually comes from  a specific source or collects in places where it would be pushed by wind and particularly by water.

Wayne

  • Member since
    May 2010
  • From: SE. WI.
  • 8,253 posts
Posted by mbinsewi on Friday, January 17, 2020 8:27 PM

OK, since you asked, I'll jump in, and agree about the "rust" on the door rollers.  

My biggest problem is you can "see"under the roof structures.  The flashing, and counterflashing that should be there, would not allow one to see "under" such roof structures.

Overall, it looks great, like your other structures.

Yea, we're all nit pickin' here, but you asked for it. Smile, Wink & Grin

Mike.

  • Member since
    November 2015
  • 723 posts
Posted by UNCLEBUTCH on Friday, January 17, 2020 8:42 PM

mbinsewi
Yea, we're all nit pickin' here, but you asked for it.

 Yes I did, and I'm taking notes.

It seams that you can look at a thing, but not really see it.       Thanks

  • Member since
    January 2017
  • From: Southern Florida Gulf Coast
  • 18,255 posts
Posted by SeeYou190 on Saturday, January 18, 2020 9:10 AM

BigDaddy
Weathering is a matter of taste as well as technique. We may not have the same tastes.

.

Very true. Weathering might be the one aspect of the hobby where each of our individual tastes can be distinguished most clearly.

.

-Kevin

.

Living the dream.

  • Member since
    January 2009
  • From: Bakersfield, CA 93308
  • 6,526 posts
Posted by RR_Mel on Saturday, January 18, 2020 10:27 AM

I grew up in the early 50s so I model the early 50s, I don’t remember very much “weathering” or rust on things back then.  Times were more lax back then and I think people took the time to make things look better then than they do now days, too much going on to spend time keeping things looking good.
 
As a result I go very light with weathering on my layout.  I remember my dad borrowing a 24’ ladder to patch a small hole made by a woodpecker near the peak of our roof in the late 40s.  He was constantly doing paint touch up on our house as were many of our neighbors.
 
Weathering is just different to different people.
 
I think your scratch build is fanastic!!!!
 
 
 
Mel
 
 
  • Member since
    April 2019
  • From: Pacific Northwest
  • 780 posts
Posted by SPSOT fan on Saturday, January 18, 2020 10:46 AM

I think the weathering looks great. If you really think there is and issue it could be that red rust color, it is a bit bright, maybe try a muter rust color over the other color in a small spot to see if you like it.

Still I don’t really see anything wrong with your work! Thanks for sharing!

Regards, Isaac

I model my railroad and you model yours! I model my way and you model yours!

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

Users Online

There are no community member online

Search the Community

ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT
Model Railroader Newsletter See all
Sign up for our FREE e-newsletter and get model railroad news in your inbox!