BroadwayLion Grass does not grow around the railroad tracks. Build your layout first, and then put the grass in where it belongs. ROAR
Grass does not grow around the railroad tracks.
Build your layout first, and then put the grass in where it belongs.
ROAR
Thats kinda my thinking,Get your track down and working. Then run the grass up to the ties. Maybe cut small tuffs to place between the ties.
I thik you would be a mutch happier modeler
The Route of the Broadway Lion The Largest Subway Layout in North Dakota.
Here there be cats. LIONS with CAMERAS
You really need a flat, solid base for your track, too. Putting it on top of a grass mat won't give you that.
It takes an iron man to play with a toy iron horse.
Thanks for all the replies, adding some water and using an old brush seemed to work, but I just can't get the track to sit flat enough on the grass mat. Even weighted down it won't press all the way down. Unfortunately, it looks like I'll have to make the track look like garbage using more traditional methods :(
mrrdadWe tried using it on my nephew's O scale layout. Never could get the turf roll stuff to look decent. It just looked like pressed down carpet!
.
I experimented with Busch grass mat on the layout segment project today. I am happy with it.
Look for a detailed update tonight.
-Kevin
Living the dream.
Lets figure the grass is glued with a water soluable adhiesive. Some water applied to soft the glue and hair brush to tease it up. Or an iron using the steaming feature and a hairbrush. Soften both the adhiesive and grass fibers. Try a small patch and see. There is always the teddy. BEar fur option
Wolfie
A pessimist sees a dark tunnel
An optimist sees the light at the end of the tunnel
A realist sees a frieght train
An engineer sees three idiots standing on the tracks stairing blankly in space
MisterBeasley Turf, ground foam and static grass gives you greater flexibility and generally better results.
Turf, ground foam and static grass gives you greater flexibility and generally better results.
This!
We tried using it on my nephew's O scale layout. Never could get the turf roll stuff to look decent. It just looked like pressed down carpet!
Ed
Semi newbie HO scale modeler coming from the O scale world
I have done exactly what you are talkign about, and had good results.
I trim away the parts that are pressed down and toss them into the trash. A little bit of loss is a fact of life.
The Busch mats used to be shipped to hobby shops in flat boxes, and this was not a problem then.
I have not used that product, so just thinking outloud;
If you just lef it lay for awhile and perhaps brush it ? or even mist it with water and then brushed.
to the forum. Your intial posts are delayed as you are under moderation.
I'm giving your post a bump up the list, but I don't have anything intelligent to add. Maybe vaccuuming would straighten the grass, or not.
Seems to me putting track on grass would create a lumpy track, but we just had a thread on bad track and it has it's fans.
Henry
COB Potomac & Northern
Shenandoah Valley
Hey guys!
I just got back into the hobby after about 15 years, I'm currently working on a small switching layout in a spare bedroom. I am modeling a whole lot of weedy, unkempt track using a tecnique I found where you lay the track on top of grass mat.
My question is for those of you who have used the Busch grass mat before. It comes rolled up, and when you get to the grass on the inside of the roll, it's all pressed down and doesn't want to stand up straight anymore. Do you have any tips to restore this matted grass to its full upright position before it's installed?
Thanks!