I got the walls cut and placed a window and door on the side facing the crane. I need to place a couple more windows on the far side as well. I don't know how I could have forgotten them.
Next step is creating the wood texture.
Chip
Building the Rock Ridge Railroad with the slowest construction crew west of the Pecos.
Sadly, no. I led a couple bird walks this weekend and ended up with a bruise on my heal that has been keeping me off my feet. I did recieve my polystyrene this weekend so at least I have the materials I need to move forward. I'll probably get back to it later today.
Chip,
Looking good. Any more progress on the project??
Guy
see stuff at: the Willoughby Line Site
trainnut1250Post some pics so we can see your work.
Before we get started. I'm pretty sure I can make scale lumber and I already have a good selection of Grandt line stuff. Anyway, here is the dock portion. It has the same footprint as the Wills Kit.
As you can see I made a couple modifications. The Wills Kit was set up for Lorries and I altered it so freight wagons could back up to it--both on the ramp and inside the freight house. Also, the height for box cars was off and I had to raise the platform slightly to match the door height.
The platform is built from popsicle sticks. The deck boards are ~3/64" thick.
Also, keep in mind that this will be sanded, filled, stained and weathered. It's still at a very early stage.
My polystyrene sheets still have not arrived. The freight house is delayed until then. From the original kit, I plan to use the crane, the sliding doors, and the roof. I haven't looked through the included details yet so I might use more.
trainnut1250BTW: when did NWSL release the “chomper” I am guessing this is a more aggressive chopper??
It would be less agressive. It is identical to the Chopper except that it has a wooden blade.
SpaceMouse trainnut1250 If you scratch build, you can build something that has more of California feel. That building is definitely European/East coast style. Well, a couple days later and I have the dock part almost done. With the help of a MicroMark Mini Table Saw and a Chomper, I build it out of Dockcycle Sticks. Pictures tomorrow after I clean it up a bit. Hopefully, my mail-order polystyrene will arrive tomorrow and I can start the freight house. You've created a monster...bru ha ha ha.
trainnut1250 If you scratch build, you can build something that has more of California feel. That building is definitely European/East coast style.
Well, a couple days later and I have the dock part almost done. With the help of a MicroMark Mini Table Saw and a Chomper, I build it out of Dockcycle Sticks. Pictures tomorrow after I clean it up a bit. Hopefully, my mail-order polystyrene will arrive tomorrow and I can start the freight house.
You've created a monster...bru ha ha ha.
In my best mad scientist voice: exxxxxceeeellent!!!! It is a slippery slope..... Once you start, theres no going back..Next you will be buying scale lumber and Grandt Line & Tichy windows and doors. Post some pics so we can see your work.
BTW: when did NWSL release the “chomper” I am guessing this is a more aggressive chopper??
My Model Railroad
SpaceMouse RR_Mel I use a nibbler for larger holes in my scratch building. Cool tool. I'm sold. Where can I get my hands on one. Micromark?
RR_Mel
I use a nibbler for larger holes in my scratch building.
Cool tool. I'm sold. Where can I get my hands on one. Micromark?
RR_MelI use a nibbler for larger holes in my scratch building.
trainnut1250If it were me, I would skip the kit and scratch build exactly what you want.
I hear you. After spending a couple hours cutting that thick plastic and still not having pieces enough to build even the first wall, I know that scratch building would be much faster and more accurate. And I certainly feel no trepidation to do so.
But I have ordered a bunch of styrene and it is still enroute no due until the end of the week. My plan was to build this kit before it arrived, and I've always liked the way it looked from the first I saw it.
Still, I could have built the dock and loading platform out of cut wood from my table saw and it would match what I have for the city walkways and passenger station and it would be done and waiting for the plastic to come. I can always use the crane from the kit.
I seem to talking myself into scratching it.
For a contrary view: If it were me, I would skip the kit and scratch build exactly what you want. Some Tichy or Grandt line windows/doors and your choice of siding/roofing material will yield a better finished product. This is an ancient kit with dated technology. It will take lots of skills and time to make what will be an “OK building” when compared to what you can build by taking those skills and time and applying them to modern materials and techniques.
If nostalgia is your thing, then go for it. And I am not saying don’t build something, I’m saying build something better. This “kit” is pretty much scratch building with the materials provided – why not take the leap and go completely into scratch building?
IMHO: If you scratch build, you can build something that has more of California feel. That building is definitely European/East coast style.
Too much from me,
And back the joint with some plain styrene. That's also a technique I've seen in some magazine articles - instead of trying to cut a square window opening int he middle of a sheet, cut down what would be one side of the window and on one piece cut in the window opening (3 sides instead of 4) then splice the two pieces back together.
--Randy
Modeling the Reading Railroad in the 1950's
Visit my web site at www.readingeastpenn.com for construction updates, DCC Info, and more.
I hope you build it and post photos. I love all the plastic patterned sheets Wills offers. There is a dealer in the Baltimore/Washington area that sells a lot of their products and I've purchased a good many over the years. They give offer a lot of neat items that are rarely seen at shops in the US.
Also, you'll wind up with a pretty unique structure that not many people will have on their layouts.
One good thing...if you have any gaps or wrong cuts, you can always mix up some glue and small pieces of scrap to make up a "putty" and fill them in before painting.
Jim
SpaceMouse rrebell Like a lot of very early craftsman kits, alot are not worth building though some have provided templates to build in other materials or provided great scrath building materials themselves. Even today I have seen laser kits that are not worth building due to bad planning or materials. I trust this isn't one of them.
rrebell Like a lot of very early craftsman kits, alot are not worth building though some have provided templates to build in other materials or provided great scrath building materials themselves. Even today I have seen laser kits that are not worth building due to bad planning or materials.
Like a lot of very early craftsman kits, alot are not worth building though some have provided templates to build in other materials or provided great scrath building materials themselves. Even today I have seen laser kits that are not worth building due to bad planning or materials.
I trust this isn't one of them.
cuyamaDvorak Keyboard. Invented 1932, patented 1933.
Thanks for the clarification. I guess I shouldn't trust my memory for such things.
SpaceMousehe mechanical issues were long since solved by the late 1800's and in 1910, the Dvorshak keyboard was invented.
Dvorak Keyboard. Invented 1932, patented 1933.
Layout Design GalleryLayout Design Special Interest Group
Wills has a number of interesting items among their offerings, which I see from time to time at swap meets (but almost always "previously owned" stuff). It is now part of Peco. A bit of history about it, and some examples, can be found here:
http://www.gaugemaster.com/wills.html
What I have found mostly are parts and scratch building supplies, plus some simple kits. The packaging is usually a sheet of cardstock with a plastic bubble around the materials.
That website above has this mention of the Craftsman series:
More advanced modellers will find the ‘Craftsman’ series of kits provides them with a good range of larger models. Parts are cut out of sheet materials using templates before assembly and painting. The third modelling option Wills offer is the means to customise a kit or make an entire model from scratch using their range of material packs. Wills believe that through these three types of Wills models, you have the widest possible choice to help you build whatever you need.
Dave Nelson
SpaceMouse The QWERTY keyboard was designed in the mid-1800s to slow typists down so the typewriter keys wouldn't stick.
The QWERTY keyboard was designed in the mid-1800s to slow typists down so the typewriter keys wouldn't stick.
I took a class in high school (Miss Gatz) and learned how to type with all ten fingers on an Underwood manual typewriter (a very nice piece of technology, the Steampunk crowd loves it). Now, I have to re-learn everything using two spastic thumbs. I could speak into the so-called smartphone a la Star Trek, but not every voice is recognized, and the result contains a lot of misspelt anthropes.
My next model I think I'll build in cubits.
At least you won't lose your ruler.
Robert
LINK to SNSR Blog
ROBERT PETRICKThe description on the box "Goods Shed" is a dead giveaway the kit is British.
I was thinking "00" scale might be a clue.
ROBERT PETRICKRegarding SI. System International. The metric system. You know, millimeters and whatnot . . . there are companies that make tools and rulers and stuff, sized and marked specifically to handle your kit. Once you get the hang of it, it is very easy to deal with.
I have no issue with the metric system. Learned it years ago and it's still a wonderment that the USA public (not science and industry) hangs onto the English system tooth and nail.
But it's a pattern. The QWERTY keyboard was designed in the mid-1800s to slow typists down so the typewriter keys wouldn't stick. They literally studied the New York Post and made the most common letter patterns the hardest to reach and the most difficult to type.The mechanical issues were long since solved by the late 1800's and in 1910, the Dvorshak keyboard was invented. With the Dvorshak keyboard typists could type 300% faster with fewer mistakes.
Guess which keyboard is used in the computer age.
The description on the box "Goods Shed" is a dead giveaway the kit is British. Or maybe Australian. Canadian, eh?
No problem, though. Still looks good. And appropriate, too.
rrinker Don't think I heard that name before, but I bet if I peruse appropriate era magazines it may well come up.
I figure that since no one seems to know the company and or specific model, it was time to take a picture.
Hey Chip -
I know there was a bit of a delay between your first and second posts, but I don't think anyone's trying to avoid your topic or waiting for you to screw up (that's a given, no need to wait).
But it is Sunday morning, and a special one at that, and I suppose a lot of guys are serving breakfast in bed to the little woman or making pancakes for the kids (or grandkids).
Regarding SI. System International. The metric system. You know, millimeters and whatnot . . . there are companies that make tools and rulers and stuff, sized and marked specifically to handle your kit. Once you get the hang of it, it is very easy to deal with. You will not have to burn brain cells to determine whether 13/64" is bigger or smaller than 5/8", and dividing 1'-7" into three equal parts would vex any of us. Give the SI a try, you might like it. Embrace the suck.
PS If Mel's photo is the kit in question, it seems like a reasonable first effort.
Don't think I heard that name before, but I bet if I peruse appropriate era magazines it may well come up.
This sounds like one of the original types of craftsman kits, none of this laser pre-cut rubbish. I have a Campbell bridge - which I will be putting together a LOT more things before I attempt this. Not that cutting wood to length is particualrly difficult. I know I have another bridge kit stashed away somewhere - can't think of whose it is - I think it's a plastic one, but NOT Micro Engineering.
RR_Mel I would assemble a Campbell or Muir kit first to get the hang of craftsman kit building then have at it.
I've built several of each. One was so old that the wood was moldy, so I replaced the main pieces with polystyrene and I liked the way it came out. Now I either reinforce the walls with polystyrene or just replace them with the plastic. I'm working on a two-stall engine house I have to shorten and waiting for the polystyrene sheets to arrive.
I like your first stratch-build project. I really like the floor plan on the floor.