here you go
fender777Some update pics of my shelf layout
Two problems, a) some people have no desire to join Facebook. b) You link says "
Henry
COB Potomac & Northern
Shenandoah Valley
Thanks bibbster for your reply. I have a huge room and their have been 3 different Train layouts in their over 30 years. The first 2 were done when I knew nothing but had much fun. I had a larger shelf that went around the whole room 12 ft by 22ft 24in wide. You could run trains around the intire layout. But I really dont want that I think. It becomes just to easy to just let train go around in a big circle. I am thinking of going around the room in a U and have one of the legs come back up in the middle. It would make a good distance point to point. But for now I have plenty to do on this part. Thanks
I'm right there with you. I've sold all but one of my wood tracks and my cars are on their way out (been listing them on ebay). Politics killed it for me, but thankfully my wife and I can enjoy building our train layout together as much as we enjoyed the cars. Besides, you only need to setup a small oval to get your racing fix, then shove it back in the closet and and run trains.
You have I bet' I have posted my pics their quite often over the years, I am having a battle within my head to just go all trains starting this fall. I will see what all the grandkids want to do. But I am just burnt out on running cars. The trains are so much more fun to do' cars you need 2 to race' but trains are fun even alone.
Thanks for the other pic of your track. I feel like I have seen that before, most likely on SCI or HRW I guess?
Your shelf layout is looking good. Looking forward to your progress on it.
Fender777, not knowing much about your era, prototype, etc, may I suggest considering what type of freight car captures your interest in deciding on your selection of industries which will aid in your choice of structures. If it is boxcars that you like, maybe you'd lean toward warehouses and factories. Covered hoppers,-- grain, cement, sand, chemicals, etc. Quite often, the type of industry served has an impact on the track arrangement.
fender777
Looks like a good start. Lay some track and you're in business.
I wanna see more of the slot car track! lol
Like Mel, I don't know much about slot cars. On the shelf layout that you are proposing, I assume it is a point-to-point industrial switching layout (ISL). And, also like Mel, I think the accessible reach may be a stretch. I think, however, that it depends on how far from the edge of the table the farthest track is. You may have full, or nearly full structures, (as is apparent in your photos), instead of mere backdrop flats, behind the far-away spurs, which would shorten the reach.
My layout is a 20 foot long, around the walls, 'U'-shaped configuration. The width varies from 8 inches (at staging) on up to 2 feet. It is an ISL, in which I have tried to maximize the amount of industrial switching, so I had the balancing act of trying not to create a "switching puzzle", while at the same time, maximizing the numbers of industrial spurs and sidings. I am still rebuilding this layout after moving homes last fall, but I figure the layout will comfortably handle about 30 cars. And, like you, I have boxes and boxes of stuff, especially motive power and rolling stock. BTW, the layout was originally an L-shaped configuration, which was expanded into the configuration that it is now. I have also found that in designing such a small layout, that putting a track plan on paper is somewhat useless. In the 4+ changes I have made in it, I have found that just playing with the track on the layout itself produces a better visual, especilly in my case, where I'm working with commercially made track and turnouts.
Terry, yeh, right! the bar is on Hwy 18, East of Cambridge, at Hope Lake Rd. That was 11 years ago already, wow. There's lot's of refferences to Matt in that town! We were bulding a new WWTF, just north of town. Stopped there most nights, after work.
Mike.
My You Tube
I think it's a great plan.When I built my layout,I just layed track and spurs where I figured they should be. I then built the buildings to fit.Sometimes had to relocate a spur to fit.
The only ting I would question ,is the 32in, pretty good reach. But you stated this ain't your first, so I assume you know what you can and can't reach.
I have no interest or knowedge of slot cars, so no comment
mbinsewiCambridge, WI
That's where Matt Kenseth is from.
Terry in NW Wisconsin
Queenbogey715 is my Youtube channel
I've seen those. A bar we used to stop at after work, in Cambridge, WI. had an outdoor track. The bar was decorated in a racing scheme, and had a small 1:24 scale layout inside.
EDIT: Just checked Google Earth. Place must have changed hands. The track is gone, nows it all yard.
mbinsewi Seems like a great idea to me. I loved those slot car tracks. It seems like there was someone, or a group, in many towns, that would start a club, and have race sessions, just like an operting session on a model railroad. Many guys built their own cars. I had family friends that were involved in such a club. I did a lot of watching, but occassional I'd get to run some of our friends cars, and race with their two boys. Mike.
Seems like a great idea to me. I loved those slot car tracks. It seems like there was someone, or a group, in many towns, that would start a club, and have race sessions, just like an operting session on a model railroad. Many guys built their own cars. I had family friends that were involved in such a club. I did a lot of watching, but occassional I'd get to run some of our friends cars, and race with their two boys.
The slot car racing hobby has evolved into large scale radio controlled cars on outdoor tracks.
I tried to sell my two cents worth, but no one would give me a plug nickel for it.
I don't have a leg to stand on.