Any one know where i can get new rivets for the throw bars on shinohara switches thanks, gondola1988.
Good luck with that one, the only place I can think of would be Walthers but I don't believe parts like that are available but it's worth a try.
i made my own out of some small diameter soft brass tubing and peened the ends with a center punch. actually the tubing i used was somewhat larger than the original rivet so i had to drill the holes out a little first.
grizlump
gondola1988 Any one know where i can get new rivets for the throw bars on shinohara switches thanks, gondola1988.
I'm curious as to why you need new rivets. Will you explain? It will be of interest of users and potential users of Shinohara/Walthers turnouts. Thanks.
Mark
Im using dcc and these are not dcc friendly switches so I have to take the jumper that is soldered to the frog out under the cross bar so hence I have to remove the rivet to do so so I can power route them to my own system