Login
or
Register
Subscriber & Member Login
Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!
Login
Register
Home
»
Model Railroader
»
Forums
»
Layouts and layout building
»
where to find streetcars
where to find streetcars
1693 views
10 replies
Order Ascending
Order Descending
Anonymous
Member since
April 2003
305,205 posts
where to find streetcars
Posted by
Anonymous
on Saturday, April 17, 2004 1:35 PM
I am looking for some streetcars for my HO layout
i was wondering if anyone knew where i could find good looking one but not brass.
OR if you have any tips on how to turn a not so good one into a better looking one.
PLEASE REPLY OR GIVE ME A TIP
Shmitty
Reply
Edit
jrbarney
Member since
January 2002
1,132 posts
Posted by
jrbarney
on Saturday, April 17, 2004 7:33 PM
Shmitty,
Review the trolley pages at
Bowser's
Web site:
http://www.bowser-trains.com/hoother/trolleys/trolleys.htm
Since you didn't state what type you are looking for, I suggest you read each page, they give fairly complete provenance for each type. The kits, IIRC, are zinc die castings. They even offer conversion kits for the trucks on
Bachmann
and other molded plastic types you can buy from
Walthers
and other sources. With luck, you'll get some responses from traction buffs who know of other non-brass kits. The cast resin kits may be more expensive than the
Bowser
kits.
Bob
NMRA Life 0543
"Time flies like an arrow - fruit flies like a banana." "In wine there is wisdom. In beer there is strength. In water there is bacteria." --German proverb
Reply
Anonymous
Member since
April 2003
305,205 posts
Posted by
Anonymous
on Saturday, April 17, 2004 10:20 PM
thanks Bob
Shmitty
Reply
Edit
IRONROOSTER
Member since
June 2003
From: Culpeper, Va
8,199 posts
Posted by
IRONROOSTER
on Sunday, April 18, 2004 5:58 AM
Labell Woodworking http://www.labellemodels.com/ has some wooden kits (without trucks).
Enjoy
Paul
If you're having fun, you're doing it the right way.
Reply
Anonymous
Member since
April 2003
305,205 posts
Posted by
Anonymous
on Sunday, April 18, 2004 12:58 PM
Bachmann offer a couple of streetcar designs, I'd recommend the older-style one as these don't look too bad after a little detailing work. Admittedly the motor is a truck-mounted "pancake" drive, but they're ludicrously cheap (I paid under £20 for mine at a LHS). Might be worth a look while you expand your fleet.
Reply
Edit
Jetrock
Member since
August 2003
From: Midtown Sacramento
3,340 posts
Posted by
Jetrock
on Tuesday, April 20, 2004 12:56 AM
Labelle kits are VERY hard to make--the classic statement is "If you want to learn how to scratchbuild in wood, build a Labelle kit."
I'm quite fond of the Bachmann Brill, it's a decent low-cost kit and it doesn't run too badly. They can be run "as is" on curves as sharp as 8-9" or modified to run on 6" or less, and the cheesy plastic trolley poles can be replaced with real poles and the motors rewired for overhead operation.
There aren't many new trolley models out there. I recommend eBay, you should be able to nab a couple of Bachmann Brills for around $10 each--or you can break down and pay $25 or so for them brand new at any hobby shop with a decent selection.
Reply
jrbarney
Member since
January 2002
1,132 posts
Posted by
jrbarney
on Tuesday, April 20, 2004 8:45 AM
Schmitty,
Some overhead supplies are also availaable at
Alpine Division Scale Models
:
http://www.alpinemodels.com/about.html
and, they also have some of the old
Suydam
traction related building kits.
Bob
NMRA Life 0543
"Time flies like an arrow - fruit flies like a banana." "In wine there is wisdom. In beer there is strength. In water there is bacteria." --German proverb
Reply
AntonioFP45
Member since
December 2003
From: Good ol' USA
9,633 posts
Posted by
AntonioFP45
on Tuesday, April 20, 2004 5:32 PM
SchmittyJohnson, [:)][:D][8D]
These guys gave you some very good tips. One additional thing that might help.
Visit local train shows as well as the GATS shows.
You can find new and used trolleys at these shows. I saw a few at the last GATS here in Tampa. Even with the cheap units, they can be mechanically reworked and body detailed to resemble more realistic traction units. I'm fond of the PCC myself. [;)][8D][:D]
Hope this helps! Don't give up. [swg][tup]
"
I like my Pullman Standards & Budds in Stainless Steel flavors, thank you!"
Reply
Anonymous
Member since
April 2003
305,205 posts
Posted by
Anonymous
on Thursday, April 22, 2004 2:35 PM
Or check out
http://www.trolleyville.com/trolleyville.shtml
for more trolley info...
Reply
Edit
Anonymous
Member since
April 2003
305,205 posts
Posted by
Anonymous
on Friday, April 23, 2004 10:00 AM
check out www.HistoricRail.com
Reply
Edit
Anonymous
Member since
April 2003
305,205 posts
Posted by
Anonymous
on Wednesday, April 28, 2004 12:45 PM
Click on
BEC-KITS
TRAMALAN
HOBBYTERA.COM
Click here for
CURRENCY CONVERSION
Reply
Edit
Subscriber & Member Login
Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!
Login
Register
Users Online
There are no community member online
Search the Community
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT
Model Railroader Newsletter
See all
Sign up for our FREE e-newsletter
and get model railroad news in your inbox!
Sign up