There are no mistakes in Model railroading, only learning experiences. I have a sign over my layout always reminding me of what I learned from an old marine friend..."Improvise, Adapt and Overcome! Defeat is not an Option!" LOL, gets me through most all of my learning experiences. The best thing to do is to read these forums, search for specifics on this site and ask. The most crucial part is to have a plan, but always remember you can and probably will modify it as you go. The track to me is the #1 most important installment of your layout, how it's installed and maintained. It's the one part that you really don't want to keep going back to for repairs once you reach a certain point of scenics and mountains and tunnels. Take your time and you only have to do it once, well maybe twice. Good Luck and always remember it's a hobby, but it's also a form of creative art!
"As for trackwork - good enough is defined as being able to run my designated derailment check train backward through the new work in both directions at twice the local speed limit. The derailment checker is a collection of junkers which will hit the ties at a harsh glance - no weight, ugly flanges and other tracking problems, headed up by a loco with mis-drilled tender truck side frames. If that will run without derailing, nothing else I own will ever have a problem."
Great advice- you done using my SD-7 yet???? (joking)
A comment about, "Good enough."
There are two aspects of model railroading about which I am fanatical:
By no coincidence at all, they are the two which have the most profound effect on operating trains over the road (and switching the yard, the industries...)
My good enough for wiring is neatly cabled, all solder joints sound, all terminal strips fully labeled, everything documented (both on disc and in hard copy.) Everything is fully tested immediately after installation. No quick and dirty, "I'll fix that later," work - if this becomes a habit, later will probably never come. And if any light or motor (including switch machines) doesn't work as advertised, it is either tweaked until it does or replaced with a like serviceable item.
As for trackwork - good enough is defined as being able to run my designated derailment check train backward through the new work in both directions at twice the local speed limit. The derailment checker is a collection of junkers which will hit the ties at a harsh glance - no weight, ugly flanges and other tracking problems, headed up by a loco with mis-drilled tender truck side frames. If that will run without derailing, nothing else I own will ever have a problem.
So, GOOD ENOUGH actually IS good enough - if you set the good enough bar high.
Chuck (Modeling Central Japan in September, 1964 - on derailment-free track with bulletproof electricals)
I second everything that everyone has already said, my only additional advise would be to never stop imagining, never stop thinking, and by all means, never stop enjoying the hobby.
Don't buy things you don't need.
Many of us have shelves full of unbuilt kits, etc., that seemed like great deals at the time. But, even if it's half off MSRP, it's not worth even that to you if there's no place for it on your layout.
Conversely - if you see something you do need for a good price, and sometimes MSRP is the only price you'll see, then you might want to grab it. Many MR items are limited production, and once they're gone, they're gone.
Finally, understand that eBay can be a godsend, or an addiction. It is very easy to get caught up in "winning" an auction, and actually pay above MSRP for a readily available item, just because you want to "win" the bidding.
It takes an iron man to play with a toy iron horse.
jrbernier Mistakes? - Make them all the time. The 'trick' is to cover them up before someone else finds them!
Mistakes? - Make them all the time. The 'trick' is to cover them up before someone else finds them!
Cover them up ?!?
Nah, just find a prototypical reason for what you did -- there's a prototype for everything. If anyone points out your "mistake," all you say is : "Well, the ABC-XYZ RR did it that way."
wjstix I were to wax philosophical, I'd say most layouts (especially my own) are a series of corrected mistakes.
I were to wax philosophical, I'd say most layouts (especially my own) are a series of corrected mistakes.
Agreed. It's a never ending learning curve!
I would say trying to cram too much stuff in too small a space is a big one. Some folks(George Selios) can make that look good, but most don't.
popscustommodelrailroads I am curious, what are some of the common mistakes you or someone you know faced while building a model raillroad?
I am curious, what are some of the common mistakes you or someone you know faced while building a model raillroad?
I started building my first large (room size) layout in July 2008. Here are the "physical" mistakes I have made:
Well this was a bit wordy, but hopefully will provide at least some of the info the OP was looking for. Jamie
CLICK HERE FOR THE CSX DIXIE LINE BLOG
The biggest thing I have learned is:
There is no such thing as "good enough". If it's not right, it's wrong.
Check out the Deming Sub by clicking on the pics:
My most common mistake is impatience. I have only limited time for my RR so I tend to try to do too much in a given period of time. Then, I have to go back and re-do some stuff. So, I guess I'd say time is a factor.
Jimmy
ROUTE ROCK!
don't glue anything that could go wrong like roadbed or track with scenic glue. still working on my first modual tearing up the roadbed. never again.
In my opinion, the most common mistake is allowing the phrase "good enough" to creep into your track laying vocabulary. Reliable trackwork is pivotal to joy in this hobby. Even small gaps and kinks will cause occasional derailments and that's no fun. When it comes to track, if an error is perceptible it is not good enough.
Phil, I'm not a rocket scientist; they are my students.
Hi!
I'm very curious as to why the O.P.'s first posting to the Forum is "what mistakes we made".
But, I won't let that stop me from answering......
I too have made most all mistakes possible over the years, and a few more than once.
But the one that really cuts the deepest is to accept something less than what I am capable of doing. In other words, the phrase "ok" or "good enough" has a few times allowed me to go on with sub-standard (in my opinion) work or design or whatever, which I guarandarntee you, has come back and haunt me every time.
My existing layout - now being demo'd for a new one - has three or four "errors" in it that I just knew (but ignored my own warnings) would cause regret, but I went ahead with them anyway. Finally, after 13 years, I am fixin to rectify that.
Hey, ENJOY,
Mobilman44
ENJOY !
Living in southeast Texas, formerly modeling the "postwar" Santa Fe and Illinois Central
"There are eight and forty ways, of creating tribal lays - and every single one of them is RIGHT."
But, what Rudyard Kipling didn't mention is that there are at least 48,000 ways to do it wrong...
The biggest blunder is the desire to cram the entire Union Pacific onto a 4x8 table in HO.
Next comes the idea that you can get it all done in an hour - with time for the closing commercials.
Third is failure to allow for the old truism - No small-scale layout plan ever expands to full size without modification. This is sometimes phrased, No layout plan ever survives the first contact between flex track and roadbed.
Flanking the last are Trying to microplan EVERYTHING, and its ugly little sister Paralysis by Analysis.
OTOH, there are some mistake philosophies that belong in every planner's mental toolbox:
And one very strong suggestion - get wheels rolling just as soon as there's a place to lay track. That, more than anything else, will keep the layout building juice flowing.
Chuck (Modeling Central Japan in September, 1964 - with all due deliberation)
Most of my 'mistakes' are from not researching before I start. Most of us will buy the track/cork/track nails and start in. When the LHS shows us those soft cover 'how to' publications, we get real tight with our funds. After all of my mistakes through the years, I bet have have just about every one of those Kalmbach publications!
I took a 'forced' vacation from modeling/layouts after I got married. A move, new position & kids took up about 3 years. Amazing what has to be done when one builds a new house. Anyway, I did use that time to 're-read' a lot of those books, and I took notes about what I really wanted to do. And I do not know how many note pads/back of envelopes/napkins that I doodled track plans on!
3 Years Later - I started my 'dream layout'. Very little in the design has changed( 2200 ft of cab control wiring & panels were removed a few years ago - DCC). This happened because I spent time 'planning'.
Jim Bernier
Modeling BNSF and Milwaukee Road in SW Wisconsin
The major mistake i have made, is being stuck in planning. i tore my old layout down 11 months ago, my walls are still bare and i have 3 notebooks full of track plans!!! I have learned, and I am now building the bench work for a small ho scale switching layout.
Joe
Modeling:
Providence & Worcester Railroad
"East Providence Secondary"
HO scale
Research, research and more research first. A computer layout planning program is a must. And then take it slow. Being in too big of a rush will be a sure fire way to result in something that you are not happy with. Aim for really good operation: smooth track work, the broadest curves possible, small grades, no electrical problems. Don't pack too much into a space. And when all else fails, rebuild before it is too late. A little done well is better than a lot done poorly. Living with a layout you are not happy with, will drive you insane. This might take you several years to do, but half the fun is getting there.
And if you are like me, you have some of them still...or repeated.
Haste is #1.
Ignorance places a close second at #2. Ignorance about the hobby, about materials, about options, about capabilities, about limitations (yours and what you can make or supply in the way of needed items)..... Ignorance about which layout and track style will suit you over the long term. For example, what curves will your favourite, and recently purchased, first locomotive handle? Were you even aware that the two have a bottom line? Were you aware that it could be had almost as cheaply with DCC and sound? Did you know that you would have preferred that purchase? You can only read so much, and then you must actually experience.
Those two cover the works as far as I am concerned. Experience will eventually make most of us fairly happy, although other considerations pertain....finances, space, relationships.....etc.
-Crandell
Welcome to the forum. Your question is a bit broad. There are dozens of different parts of this hobby and I have made a mistake or six in everyone. The one mistake I have not made is to let a mistake get me down.