You can order diluted matte medium, in gallon quantity, from Scenic Express, the same folks who sell the Super Trees. When soaked in the matte medium, the Super Trees will be less brittle as they age. You could probably also use glycerin, if you have source to purchase it in large quantities.
You can also modify the Super Trees by adding (or subtracting) limbs to them. We use some hot glue to attach limbs. As some have noted, the trunks are a little thin at the base. We use hot glue to attach small headless nails to the trunk; when painted, it all blends together with the trunk plus gives you a positive way to mount the trees.
Jim Brewer
cudakenSo the answer is at this point Matte Medium is used only to hold the ground foam on. We will see with time.
So the answer is at this point Matte Medium is used only to hold the ground foam on. We will see with time.
The Matte Medium is to preserve and protect. It makes them less fragile. As the super trees dry they become very delicate. The Matte Medium helps them to hold up to handling and wear and tear on the layout. I would not skip this step.
I use strong hold hair spray to adhere the ground foam. Its a lot easier and can be re-applied to add subsequent layers of ground foam. I spray, do a loose layer of coarser foam, spray again, and apply fine ground foam more heavily. This creates a nice three dimensional effect on my N trees.
The basic technique I use is from Joe Fugate's second scenery DVD. I modified it to fit my needs with N trees. He has the chapter on making trees available for download as "TENMILE CREEK SERIES - Part 14: Realistic deciduous trees" on his site for a few bucks.
Chris
Simply soaking them in matte medium and then hainging them with weights to straighten them out has never worked for me. I boil mine first. Check out this tutorial.
http://www.fcsme.org/bcarl/how_to_make_scenic_express_supertrees.htm
The matte medium seals the plant and thereby preserves it. It is an important part of the process (apparently) if you want the tree to last. Once soaked in matte medium the trees get a little more resistant to damage as well.
There are certainly better ways to hold the leaves on than the matte medium, but I suspect that hairspray,spray adhesive and so forth will not preserve the tree. If you read the manual that comes with the trees it makes it quite clear what the purpose of matte medium is and also why matte medium over white glue.
Of course it is always your call.
Good idea and great results, Grampy. Thanks.
- Harry
Thanks Ken: Here's a tip you can use, if you want. IMHO, there is one little problem with Super Trees. If you have a single tree somewhere, the trunk is a little too thin. I had a few near some buildings, so I cut a short section out of a bigger twig, measured the trunk of a single Super Tree, and drilled a hole in the twig, then CA'd the Super Tree into the hole, then used Squadran Green putty to taper the joint. Then, I sprayed the whole trunk with gray primer. Here's a couple of examples. These were my first attempts, If I were doing another, I would make the taper longer. Just an idea.
Ken--
I'm in the midst of replacing all of my old WS fall deciduous trees with SuperTrees, and what I've done is what is recommended by the other posters--soaking them in warm water for about 20 minutes, then hanging them upside down to straighten.
I've been using cheap hair spray as a bonding agent for the leaves--give the bare tree a heavy coating of the stuff, then dipping it in the foilage material, shaking off the excess, then giving it another good heavy spray to fix the leaves on. Works really well for me. I really like the SuperTrees, they don't look as 'clumpy' as the WS. And once you get used to them, they're really easy to work with.
Tom
Tom View my layout photos! http://s299.photobucket.com/albums/mm310/TWhite-014/Rio%20Grande%20Yuba%20River%20Sub One can NEVER have too many Articulateds!
Grampys Trains, thanks again for showing off your great art work again, it is all wise stunning!
All so thanks to all that answered.
I finally have my answer the hard way, I had at it. I soaked the tress in hot tap water for 20 minutes. They became very soft and would not break as I bent them. On the larger tree's I did, I bent some of the limbs to the point the limbs collapsed at the bend point. Hung up side down and added clothes pins to the high end of center of the tree, then clothes to the limbs I bent. Tonight I pulled them down and they stayed in the same position as when weighted. Smaller trees I did the same thing, bent the trunk some then hung up to dry. On the little more difficult ones I used 2 to 3 clothes pins.
Thanks Again, Cuda Ken
I hate Rust
Hi Ken: According to the instructions that come with the SuperTree starter kit, the Matte Medium is supposed to apply adhesive for the foliage, and to encapsulate the tree in acrylic to preserve it. Like some of the other posters, I've had some success straightening some of the bigger trees, not so much with smaller ones. So, some of mine are straight, some are not.
I don't know if soaking them makes a difference, or is needed. After seeing this post though, I may try a few in the future that way. I would presume that the matt medium would help seal the natural material, and water would not.
I have another picture for you that shows unstraightened supertrees, with a variety of covers.
I'm trying to model 1956, not live in it.
Again, thanks for the answers but, my last question was not answered. So I will try to straighten some trees with out the matte medium, what do I have to lose anyway? I will let folks know what happens.
Cuda Ken
I went through quite a few of the super trees some I straightened some I left. The ones I straightened I let soak in warm water then hung upside down with clothes pins at each end.
For attaching the leaves I used hairspray.
Lynn
Present Layout progress
http://cs.trains.com/mrr/f/11/p/290127/3372174.aspx#3372174
I have not had a lot of success straightening them out either. However, unless the bend is extreme, keep in mind that most trees are not perfectly straight. I kept some of the imperfect ones the way they were and planted them in a group. It turned out much better than I expected.
I used Modge Podge. I like to buy supplies like that when the craft stores have the 50% off coupon. I get the Michaels ones with the newspaper. AC Moore has them online.
Someone on the board once commented that Modge Podge will yellow over a few years time. I have no experience with that happening but is a non-issue for super trees presuming you are painting them.
edit - I didnt have much luck getting them to straighten.. I will have to try out the boiling idea.
I didn't straighten mine, so far they've gone in nicely. What I have done is spray paint them different tones to represent different species of trees; gray, brown, and white trunks. I also use the Noch leaves on some instead of foam, I like the leaf look better to be honest, but the variety is key.
I just used a white glue, water, and denatured alcohol mix in a spray bottle for mine, seems to work pretty well.
You can see in this picture a variety of them with different foliage "solutions" in place.
Thanks for all the answers folks and thanks for the link Crandell.
Now I am just a little confused what the Matte Medium does?
Does soaking or boiling the Super Trees in water make them ply able and after drying they will stay straight. Matte Medium just holds on the ground cover? Or does the Matte Medium keep the super tree straight?
If it is just to hold the ground foam on, my hair spray works fine.
Ken,
I don't dilute it too much--about 25%, which looks to be about the same consistency as matte medium. You can experiment a bit. Without dilution, white glue seems just a bit too thick.
John T.
cudakenwhat ratio should I use with the with glue?
Dr. Frankendiesel aka Scott Running BearSpace Mouse for president!15 year veteran fire fighterCollector of Apple //e'sRunning Bear EnterprisesHistory Channel Club life member.beatus homo qui invenit sapientiam
Great site!!!
Mainetrains
'there's something happening here, what it is ain't exactly clear' Modeling the Hard Knox Valley Railroad in HO scale http://photos.hardknoxvalley.com/
Ken, here is what one fellow did. I'm looking for other sites and tips.
John, what ratio should I use with the with glue?
Far as the $ from Wally World, about the same from LHS. Luther, what is the ratio with it?
Thanks for all the quick answers I will add.
Wal Mart sells Mod Podge matte medium back in their craft section. Get ready for a sticker shock. It's gone up to almost $7 for 16 oz.!!!
If you have a Michael's or Hobby Lobby in the area, they both carry Matte Medium. I believe Michael's carries Mod Podge brand.
Don Z.
Research; it's not just for geeks.
Yes, you can use diluted white glue. I prefer matte medium. You can buy it by that name at any Michael's, Hobby Lobby, Jo-Ann Fabrics & Crafts, etc.
John Timm
I have some Super Tress and need to make them straight. Went to K-10 Model Trains to pick up some Matte Medium and much to my dismay the LHS was closed! Seems Ken the owner changed his hours and is not open on Friday any longer.
What might I find around the house I can use instead of Matte Medium? Could I use white glue deluded with water? Can I get Matte Medium at a art store and do they use the same name for the stuff?
Thanks for the up coming answers.