Yellowing water

[Anonymous]

I would suggest using a very dark blue, or else adding in some black, to tint with. Yellow and black pigments, mixed together, usually come across as green to our eyes, and the extra darkness will add depth. Using straight blue bay end up producing a bright green which looks radioactive. You also might try drybrushing white highlights prior to applying the new gloss; the flat white will hide a bit of the yellow.

[Anonymous]

QUOTE: Originally posted by crabuback

That's worth a try. What do you suggest to color the realsist water?

You can buy tinting pigment from a paint or art store. It should be water based.

I use to work as a color matcher, so I should have known to tint it with blue.
Adding blue to yellow makes green but don't add too much or it'll get too dark. Try doing it in layers of thinned out or transparent blue giving each layer time to dry to see if you like it.

How do we see color? White light is basically made of three primary colors, red, yellow , blue. If an object is yellow, it is because the white light strikes the pigment in the object and red and blue are absorbed by the pigment and yellow is reflected.

[Anonymous]

That's worth a try. What do you suggest to color the realsist water?

[Anonymous]

QUOTE: Originally posted by crabuback

Wrong product - I was talking about "Realistic Water" which comes as a liquid. I've used "EZ water" before, too, and have not had the yellowing problem with it.

[D)][oops] I asked them again
Ok, here's the real deal for sure!

QUOTE:
Most likely the Realistic Water absorbed color out of something beneath it. You can add a thin new coat of Realistic Water that has been tinted with a small amount of blue color, giving you a final green color.

[Anonymous]

Wrong product - I was talking about "Realistic Water" which comes as a liquid. I've used "EZ water" before, too, and have not had the yellowing problem with it.

[Anonymous]

QUOTE: Originally posted by crabuback

I used Woodland Scenics' "Realistic Water" over a painted plaster waterfall last year. The water has "yellowed" over time. Is there anything that can be done, other than paint over it?

How long ago did you poured it?
Did you try to remelt it with a heat gun or hair dryer?
I sent Woodland Scenics an e-mail asking if there was a way to restore to clear.
Here is there reply:

QUOTE:
E-Z Water, as can be seen in the bag, is yellow from the beginning. The only change in color to the product itself that we are aware of occurs when it is overheated and becomes darker. We do not know how to make it lighter in color. E-Z Water makes realistic looking green, brown and gray waters when poured over a properly painted area.
Woodland Scenics

It it possible to remove it?

[Anonymous]

I used Woodland Scenics' "Realistic Water" over a painted plaster waterfall last year. The water has "yellowed" over time. Is there anything that can be done, other than paint over it?