Staple it! Use the large hand staplers. That way you can remove the staples and relocate the roadbed if needed.
Wes
Lefty
Rather than ramble on I thought I would refer you to a couple of existing threads on the subject.
Here
And here
Apparently, removing cork that is stuck down with latex is easy enough as long as it is not applied to foam. Just slip a putty knife under the roadbed/track and slide it along cutting the adhesive. The foam pulls apart I guess.
I finally made it to the process of laying roadbed and track.
I'll be using latex caulk as the adhesive to hold the cork roadbed to the plywood sub-roadbed and the track to the cork roadbed.
I know a lot of you have used / use this method. I would appreciate any tips you can share.
Thanks,
Bill