Trains.com

Water tight motor

1041 views
8 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    April 2003
  • 305,205 posts
Water tight motor
Posted by Anonymous on Saturday, March 24, 2007 5:17 PM

Looking for a motor 12v that is water tight for use on a swing bridge.

Any ideas?

William

  • Member since
    April 2005
  • 236 posts
Posted by Snoq. Pass RR on Saturday, March 24, 2007 8:20 PM
Try www.towerhobbies.com.  They have R/C boats, planes, and cars.
Account abandoned
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Sunday, March 25, 2007 1:11 PM

Found a remote controled tank (motor) on there that would allow me to open and close the swing bridge but still not water proof.

Think I will have to find a spec. motor for it to be water proof.

I was reading about LGB turn out coils in a old GR Mag and the effects of the moister on them I can think what it or a lot of rain would do to a stream with this type of bridge.

  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Sunday, March 25, 2007 11:43 PM
I don't think there are any waterproof dc motors...Inductive type AC motors like aquarium pumps, yes. dc, ???? It would interfere with cooling. However building a waterproof box to contain a regular motor shouldn't be all that hard
  • Member since
    August 2004
  • From: Virginia Beach
  • 2,150 posts
Posted by tangerine-jack on Sunday, March 25, 2007 11:54 PM

Why not follow prototype practice and put the motor in a water proof building and run a chain drive (or something similar) to the gearing mechanism of the bridge?  This will remote out your electrical components and protect them from harm.  That sounds a lot easier to me than trying to find a waterproof motor.  With this method you could use any DC motor, say one from a cooling fan off a junk car for example (already water resistant, but not water proof), and set up a simple pully system to open and close the bridge.  

Just a thought......

The Dixie D Short Line "Lux Lucet In Tenebris Nihil Igitur Mors Est Ad Nos 2001"

  • Member since
    June 2006
  • From: Oakley Ca
  • 1,407 posts
Posted by dwbeckett on Monday, March 26, 2007 9:31 AM
All of the swing bridges in this area, except one , have bridge operator's enclouser on the side. this would give you a place to hide and mosture proof your motor with a gear drive. Note all of these are for auto's. We also have Lift and Bascule?? bridges. I just remembered one in the middel of SF bay south of Hayward Ca. it's alway's open. and I don't remember if it has a operators enclouser. Maybe one of the BAGRS members have picture they would share.

The head is gray, hands don't work , back is weak, legs give out, eyes are gone, money go's and my wife still love's Me.

  • Member since
    July 2006
  • From: Jones County, Georgia
  • 1,293 posts
Posted by GearDrivenSteam on Monday, March 26, 2007 12:09 PM
How about an older windshield wiper motor? they were water proof because they were mounted under the cowl in the weather.
It is enough that Jesus died and that he died for me.
  • Member since
    August 2003
  • 6,434 posts
Posted by FJ and G on Monday, March 26, 2007 2:19 PM
Lowes and HD sell a number of waterproof electrical boxes in various sizes and shapes. Not sure why more folks don't use these.
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Monday, March 26, 2007 7:42 PM

Yes the plans do have a bridge operator's enclouser on it.

Some great ideas ya'll all have and will put them to good use! Smile,Wink, & Grin [swg]

Search the Community

FREE EMAIL NEWSLETTER

Get the Garden Railways newsletter delivered to your inbox twice a month

By signing up you may also receive occasional reader surveys and special offers from Garden Railways magazine. Please view our privacy policy