gvtrainman1 wrote:Mine is 6"
Interesting handle you chose.
I hope this will not cause confusion at a glance.
Ken Fillar
I did have one.
I just stuck it on a newer Shay, put the Shay on the track, rough measurement, railhead to top of stack, 8-1/2".
TOC
Isaac- there are 4 stacks.
The biggie is not any of the above.
The cabbage and diamond are the smaller ones, the Pardee-Curtin is even taller.
I have one here somewhere (Marshall had to scrap his due to height, you'll see one or two in the weeds on his RR).
There we go! Thanks!
Allen
Okay here are the three stacks. This is measured from table top to highest point on 2-Truck shay.
A Straight stack was 6" tall (highest point was the whistle at 7")
A Mushroom stack was 7" tall
A Diamond stack was 7.5" tall
If you are planning your layout based on the shay, I would make bridges and tunnels ~10" tall to be safe.
With the Stack? I don't think so!
Rene,
Just for kicks, how tall is the Shay with the Pardee stack attached? Might as well build everything tall enough from the get go!
There was a mixup with this post disappearing, so I'm splicing two threads together:
From the original draft of the review for the two-truck Shay with short, straight stack: 20 1/8" over end beams, 22 ½" over coupler faces.Frame is 4 7/16" wideMeasurements are virtually identical to the original, not surprising as mentioned above, the frame, boiler, and tender shell are the same castings.Height at the roof vent (above the rails) is about 7", while the whistle (highest on this unit) is about 7 ¼". That said, the 3-truck height and width are identical, EXCEPT the stacks can make the MUCH higher.The old Pardee-Curtin stack was so tall we had to remove the stack to operate on some railroads (tunnel clearances). TOC
Rene Schweitzer
Classic Toy Trains/Garden Railways/Model Railroader
Please can someone tell me quickly how tall the bachmann shay is in inches?
i was told 8" but it cant be, thats way too tall...
6" max right?
kevin
Get the Garden Railways newsletter delivered to your inbox twice a month