Edit topic

Updated your discussion topic below.

Subject
Enter a subject for your topic. Maximum 150 characters.
Post Body
Enter your post below.
Has anybody the same problem with using the LGB 10 amp Jumbo Transformer ?I've just bought a used one and when all the power is off and all the controls are set to 0 the motors make a sort of whining sound but the engine does not move. I measured the track voltage with the engine on the track and it's a constant 0.2 volts DC.Without the engine on the track the voltage is 0.765 volts DCIs this normal and can it damage the motors ? I've tested the jumbo with a Bachmann 2-8-0, a Accucraft 2-8-0 and an old Bachmann 0-4-0 but all make the same noise from their motors.The sound unit in the 2-8-0 works fine so there is no "signal noise" from the jumbo.From a G scaler in Norway.
Tags (Optional)
Tags are keywords that get attached to your post. They are used to categorize your submission and make it easier to search for. To add tags to your post type a tag into the box below and click the "Add Tag" button.
Add Tag
E-mail Subscribe
Check the box below if you want to receive e-mail notifications when replies are made to this thread.

Receive notifications