Gorilla Glue is not Weatherproof

[Anonymous]

Gday, Id say you need screws as well but why use wood screws, why not bolt through with machine thread and a nut. R/C car nuts and bolts are made so bloody small that if you drop em dont bother trying to find it. Tower hobbies sells spare packs and would look life like as well as serving a purpose, just like the real thing ay.......

Stacy

[kovacjr]

Just wanted to let you all know that Micro Fasteners has all the small screws and bolts you can ask for. Check them out at http://www.microfasteners.com/

I had ordered from them for a project I am working on and got the parts the next day, Quickest I have ever seen anywhere

Jay

[spjrr]

Hey Folks,
I wish I had seen this thread earlier. Here at the Junction we did extensive testing on many glues including Gorilla glue and didn't like this type for several reasons for use on wood. In our case joints on pressure treated pine failed after a few weeks of exposure to the elements. It was better on cedar, but it if can't soak in to the wood fiber it won't hold for long. Plus it's messy and slow to cure. It can foam and expand to fill gaps but this can also make it even more messy. This is a polyureathane based glue and others of this type we tested performed pretty much the same.

Most of the water based wood glues (alphatic-resin) that state water resistant do well if the wood is sealed after the structure is completed. In the case of buildings inside and out. Our favorite in this catagory is elmers probond due to its low price up here.

Our favorite glue of the year is testors for wood. I comes in a green 5/8oz tube for about a buck at walmart. I like it for its quick set time 6-8 min and you can start to handle the project and add more parts. And before the emails start rolling we don't carry it as we ship mostly US postal and it can't be shipped due to it's being flammable! There are other brands that are similar but most don't set up as quick but do a good job as well. One being BOND 527 in a larger tube you see at craft stores. 3.2oz tube about 3 bucks up here at walmart.

Hope this helps....we are in no way affiliated with these companies and just stating facts gathered in our testing of their products.

[Anonymous]

Keep in mind that Titebond II is water RESISTANT not waterproof, you ought to seal the bridge with something to protect the integrity of the glue joints.

[markperr]

I hear good thing then I hear bad things about Gorilla Glue. It makes me wary. I have a trestle that is 25 actual feet long and it is held together at the joints by a combination of Titebond II and 18ga air nails. There is no sealant on the wood and it is really starting to show it's age, but the joints are holding as securely as the day I put them together. That's been through three Michigan winters and almost four summers.

Mark

[Anonymous]

Last time I used it was on the long side of four boards eight edges total that are mitered, wrapping a treated post with Cedar. That was over two years ago they are still holding. And anyone who has miters together out side will tell you how quick they'll open if not secured correctly!

[CandCRR]

Has anyone gone to a Ships Stores (boat shop) to find out what they use? If anyone would know what works in wet conditions I think they would.

Also, have you noticed that if you don't clamp (or screw) your parts together with Gorilla Glue it actually expands? I found this out the hard way. I have been told that is one of its positive aspects because it sort of forces its self into all the little cracks and crevices in wood grain for a better hold.

[Bergie]

QUOTE: Originally posted by cacole

Despite Gorilla Glue's assertion that it is an all-weather adhesive suitable for outdoor use, I just had a bridge that was assembled with Gorilla Glue fall apart after three days of intermittent rain. I had even clamped the parts with c-clamps for 48 hours when this bridge was assembled.

Oh no, don't frighten me like that. Just last week I used Gorilla Glue to stregthen my wooden mailbox post (along with some screws) after a snowplow took a swipe at it last winter. (I know, I know, that was MONTHS ago, but I've had plenty of other projects ahead of this one). I guess I'll have to wait and see how she holds toghether.

As an alternative, could you use any type of two part epoxy? Whenever I need something to stay together for all eternity (whether in my woodworking, home improvement, or model railroader ventures) , I pull out the epoxy. Have you ever tried that?

Bergie

[Greg Elmassian]

duplicate post deleted

[Greg Elmassian]

You can probably find small SS sheet metal screws. Normally the difference between wood screws and sheet metal screws is that the shank is threaded only part way (wood screws) or all the way up (sheet metal).

Don't get the self-tapping ones, they are blunt on the end and/or have a cutting edge that hogs out the hole too much in wood.

I've found them pretty small.

Regards, Greg

[John Busby]

Hi
Screw and glue is good advice but as mentioned wood screws don't go that small or do they?? what do the dolls house people use?? might be an answer there??.
For bridges the real ones are bolted and spiked often with steel gussets
12BA X 1" bolts and nuts, are avalable from model engineering supply houses 14 BA might be too small, 12BA would be suitable the gussets could be made from brass.
But you would still need an exterior grade glue and paint or perhaps a very expencive boat varnish which will definatly be water proof lets face it boats sit in water
regards John

[Anonymous]

If you are working with wood you should use screws, and glue. If you use screws when you put something together, of course it has to be big enough to use screws, it won't come apart.

[Anonymous]

cacole, Gorilla glue has never given me any problems, Keep in mind it does have a shelf life after being opened if I'm not mistaken.

[mgilger]

cacole
In a few months, please report back as to how well the Titebond is holding up. I have plans on doing some building this winter.

Thanks,
Mark

[cacole]

mgilger -- yes, everything was coated with Varathane Diamond Spar Urethane for Outdoor Use. It doesn't say anything about UV resistance on the can, but it is supposed to be waterproof and made to go on outdoor furniture, etc..

I've reassembled the bridge with Titebond II, which several people recommended, and have coated the joints with latex caulking to keep moisture out after the glue set.

Next time, if there is a next time, I'll use deck screws and glue.

[BudSteinhoff]

Been using Titebond II for several years on bridges, buildings and to hold the ballast together.
Some have been outside for 6 years and have had no problem with the glue holding up even with all the Florida rains and humidity.

Bud[8D]

[mgilger]

Thanks for the heads up on the Gorilla Glue. I've been building stuff with it now for several months and so far it's held up fine. So that just tells me that I need to be watchful and catch any problems before they become big one's.

I live in Northern Ohio and we have had a bunch of rain so far this year.

Question. After gluing, did you use any type of sealer on it? I've been using a UV resistant Polyurethane. Maybe that’s the right combination??

Regards,
Mark

[TheJoat]

I use Tite Bond II for outside, but I also use some sort of mechanical connection on every joint. For my bridges, I use brass escutcheon pins. I seal everything after it's assembled.

Perhaps your bridge did not have enough moisture when it was assembled?

[Anonymous]

Use "industrial strength 6ooo" It is available at hobby shops.It is simply unbelievable.I once used it to hold an emblem on a hubcap.It is still holding 2 yrs later.

[Anonymous]

I have used Titebond II for quite some time. My oldest wooden building is in it's fifth year outside with no problems although I do bring the buildings in from the snow for the winter.

[whiterab]

QUOTE: What brand of glue is truly weatherproof?

I am assuming that you are building in wood. I use Titebond II and Titebond III and have had no problems. I do seal all the wood models and make doubly sure the all joints are well sealed against water penetration. Titebond is also easier to use and doesn't have the spreading problem of Gorilla Glue.

What type of wood are you using? Some wood such as balsa will absorb water quickly and you may be getting failure from warpage.

[cacole]

You're still going to need glue, even with that brad gun -- I used brads, too, but the bridge still came apart after the glue let go.

[highrailjon]

Hey, Guy's!! I also bought a bottle of that Gorilla Glue stuff, and it was'nt worth a flip even on my indoor O scale layout!! I plan on building my own bridges and buildings for the garden layout once I get rolling, so this is what i purchased: A small air tank for around $80.00 and a nail gun for around $50.00. If that won't hold it together, I don't need it!!!!!!!!![;)]

[markn]

I got a bottle of Elmers version of Gorilla Glue and it hardened in the bottle(in Virginia humidity) within a month and I had not even used it -hearing your story-maybe it did me a favor. I have had good luck with the CA glues-inside and out but they are expensive-I was hoping the "gorilla glues" would be more economical on large projects. Sorry no experience with the two brands you mentioned but I am about to put Loctite "Power Grab" to the test outdoor-will advise

[cacole]

Despite Gorilla Glue's assertion that it is an all-weather adhesive suitable for outdoor use, I just had a bridge that was assembled with Gorilla Glue fall apart after three days of intermittent rain. I had even clamped the parts with c-clamps for 48 hours when this bridge was assembled.

What brand of glue is truly weatherproof? I have some Titebond II Premium Wood Glue that claims to be weatherproof, and some Elmer's Probond Interior/Exterior Wood Glue that also claims to be weatherproof.

Do any of you have experience with either of these glues and can advise me on which is best?

Thanks.