Trains.com

bluue or pink foam

2010 views
7 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    January 2004
  • From: long island
  • 110 posts
bluue or pink foam
Posted by jmozz on Friday, July 8, 2005 7:08 PM
I read the article on using blue foam for making buildings . I want to know how thick this foam is and can you use pink foam,foam core or gator board has sub structures jmozz
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Friday, July 8, 2005 9:32 PM
Jmozz, haven't seen you around in awhile! Good to here from Ya!

The pink foam is more ridged then the blue and generally comes in thicker sheet around 1 1/2 inches where as the blue is commonlly found in 3/4 of an inch thickness. both will work well providing you use a foam board adhesive, many construction adhesives will eat right throught it.

I did see an article on gator board in I belive model railroader but can't rember if you can use it outside. I'll check my back issues and report back.
  • Member since
    April 2003
  • From: US
  • 1 posts
Posted by gnarrow on Saturday, July 9, 2005 2:43 AM
i use 1/2 inch blue board for buildings, drop ceiling grid for windows an wooden stir sticks for vertical siding, an trim
  • Member since
    February 2003
  • From: US
  • 69 posts
Posted by wd8jik on Saturday, July 9, 2005 6:02 AM
I've found that there isn't any noticeable difference in the blue and pink foam that I find in my area. I am on the cheap side so I check out any work site I see in the area and ask for their scrap pieces of foam. A couple of times there would be almost whole sheets thrown away.
I have been trying different ways to make stone work using foam and am trying to finish a page now on what I have been doing.
I will post a notice when I have it finished.
Here are a couple of ways to use foam.

Yogi Wallace,

Bellaire, Ohio

  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Wednesday, July 13, 2005 3:46 AM
Jmozz, according to the article there are two types, gatorplast, and gatorfoam.

The author suggest using the gatorfoam only for outside structures.

Let us all know of your results.
  • Member since
    January 2004
  • From: long island
  • 110 posts
Posted by jmozz on Saturday, July 16, 2005 9:49 PM
Carpenter Matt thanks i'vebusy my daughter graduated high school now on to college I've been redoing my workshop so you be seeing more of me thanksjmozz





  • Member since
    April 2005
  • From: West Australia
  • 2,217 posts
Posted by John Busby on Saturday, August 27, 2005 8:54 PM
Hi jmozz
Some people have used the white packing foam for buildings
that are ouiside.
I questioned the use of that type of foam. apparently with the proper finish its fine.
However you will need to build your buildings on a slate or similar base
so they dont blow away.
regards John.
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Wednesday, August 31, 2005 8:34 PM
We built a via duct using white foam (5 laminated layers glued together) covered with concrete, has held up for around 4 years now - just need to patch up when a tree branch falls on the via duct.

mikadousrp

Search the Community

FREE EMAIL NEWSLETTER

Get the Garden Railways newsletter delivered to your inbox twice a month

By signing up you may also receive occasional reader surveys and special offers from Garden Railways magazine. Please view our privacy policy