Trains.com

Mounting A Bridge Outdoors

1383 views
19 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Tuesday, May 10, 2005 7:29 PM
I would not do this at all, what about just showing your bridges and getting opinions as to where they should go and how; you never knw all your guests may put the bridges in place for you and you can charge to them to do so, remember Tom Sawyer!


Rgds ian

PS mounting bridges is easy and I have already done several, mainly conncrete this is what real men have their bridges made of. A spirit evel is essential.
  • Member since
    April 2003
  • From: New York
  • 214 posts
Posted by Chompers on Tuesday, May 10, 2005 5:30 PM
Well since i didn't get them mounted temperarily, how should i mount them permanently.
The P.C.&.M.R.R SA#14
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Monday, May 9, 2005 7:46 PM
Correction 10 years. Sorry.
  • Member since
    April 2003
  • From: New York
  • 214 posts
Posted by Chompers on Monday, May 9, 2005 3:02 PM
Hey!!!
my trains have held my intrest for 10 years
The P.C.&.M.R.R SA#14
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Tuesday, May 3, 2005 7:10 PM
Chompers Mom, If the RR has kept your son's intrest for 3 yrs don't nix it. Keep in mind there never done and always growing track or plant wise.

Could be worse he could be investing his $ on dope.
  • Member since
    April 2003
  • From: New York
  • 214 posts
Posted by Chompers on Monday, May 2, 2005 8:51 PM
hello everyone and thanks for the great advice. This is chompers Mom! please don't think we are as looney as my son makes us sound. Dad wants bents mom thinks the brick idea sounds just great! We're going for it. (I have the last word)[^] Been living with a construction zone in the back for 3 yrs. and real sick of it. Philip will let anyone who cares know what happens; ripped out or running!
The P.C.&.M.R.R SA#14
  • Member since
    March 2005
  • From: PA
  • 27 posts
Posted by Pagardener on Sunday, May 1, 2005 11:04 AM
IMHO .. Marks solution sounds the best. If you use concrete you have to get below the frost line. I am glad Mark posted as I am building a trestle which is 24" high and going across a natural gorge that is 15' long. I have lots of those blocks from a pathway I dismantled and that is how I will support the bents. Good luck
  • Member since
    January 2005
  • 225 posts
Posted by markn on Saturday, April 30, 2005 9:33 PM
Chompers-did you figure it out or get an answer-if so Good Luck-if not clarify a couple of things. You said trestle-bridge-trestle, right? I assume you have a say 6 feet gulch- 18 inch trestle(bents every 3") -3 ft clear span bridge-18 inch trestle and you need to mount the trestle bents-right?
  • Member since
    April 2003
  • From: New York
  • 214 posts
Posted by Chompers on Saturday, April 30, 2005 5:36 PM
ghelman,

Non Taken [8D][8D][8D][8D]

I kind of laughed.

I said put bricks under the end, but parents say "not for the party" they want bents [%-)]

The P.C.&.M.R.R SA#14
  • Member since
    April 2005
  • From: Kingsland Georgia, USA
  • 203 posts
Posted by ghelman on Thursday, April 28, 2005 6:34 PM
Chompers,

Sorry if I offended you. Not intentional at all.
George (Rusty G)
  • Member since
    April 2003
  • From: New York
  • 214 posts
Posted by Chompers on Thursday, April 28, 2005 3:33 PM
Kiss oh you meen....Keep It Simple Stupid [D)]

I have abutments, but i need to support a three foot long span w/ out supports underneth. my bridge is like this trestle-bridge-trestle.

Concreet blocks ok
The P.C.&.M.R.R SA#14
  • Member since
    December 2001
  • From: Smoggy L.A.
  • 10,743 posts
Posted by vsmith on Thursday, April 28, 2005 12:17 PM
I agree with Marty, get it up and running, even if only temporary, then after your party you can go into the longer term issues like building wood or concrete abutments.

   Have fun with your trains

  • Member since
    April 2005
  • From: Kingsland Georgia, USA
  • 203 posts
Posted by ghelman on Thursday, April 28, 2005 11:05 AM
Chomper, I like Marty's idea. I have used bricks to support both ends of my bridges permantly. Of course, my bridge is short and the tressles don't provide real support anyway. Sometimes ths KISS theory is best.
George (Rusty G)
  • Member since
    August 2004
  • From: Whitmore Lake, Michigan
  • 350 posts
Posted by markperr on Thursday, April 28, 2005 10:48 AM
I took 2" x 8" x 16" blocks that you can buy at Home depot and buried them sideways so that the 2" x 16" side is facing skyward. Mounted my trestle bents on them using liquid nails (the outdoor projects kind) and they've been fine through two Detroit winters.

Good luck

Mark

  • Member since
    July 2003
  • From: Nebraska City, NE
  • 1,223 posts
Posted by Marty Cozad on Thursday, April 28, 2005 3:13 AM
Philip
Jut because of time and the party , stick a brick under each. and silicone the ends to an abutment. I only have one old bridge with bents and its in cement as said above. Because wood will float up out of dirt over time.

Is it REAL? or Just 1:29 scale?

Long live Outdoor Model Railroading.

  • Member since
    April 2003
  • From: New York
  • 214 posts
Posted by Chompers on Wednesday, April 27, 2005 9:00 PM
Every one out there!!!

I realy need an answer!!!!
we have a party in 2 weeks. that gives me 1 week to mount them. Also if i don't mount them and the railway is a mess for the party.... mom says she will rip the hole layout out[xx(][:O][:O][banghead][wow]
The P.C.&.M.R.R SA#14
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Sunday, April 24, 2005 7:20 PM
To me this sounds a terrible and silly way to go about things, but I live in the tropics and what works in one place may not work in another.

I do all my work in like this in concrete (cement) and I concrete everything in and then use liquid naisl and nails or screws on the upper parts all to together at the same time; let it cure together and you have a rigid and square structure that will not move for years and years.

However if i were to put wood in the ground i would treat it somehow against underground life first before concreting it in.


Rgds Ian
  • Member since
    April 2003
  • From: New York
  • 214 posts
Posted by Chompers on Sunday, April 24, 2005 4:07 PM
I live in rochester NY, it gets cold. 10 to 15 or even 20 below freezing.
The P.C.&.M.R.R SA#14
  • Member since
    January 2014
  • 1,264 posts
Posted by bman36 on Sunday, April 24, 2005 4:04 PM
Hey there,
Sounds fine to me. I guess it all depends on your climate over Winter. Here frost can move a lot of things. Plan on doing some bridges myself so I'll have to wait and see what others say. Later eh...Brian.
  • Member since
    April 2003
  • From: New York
  • 214 posts
Mounting A Bridge Outdoors
Posted by Chompers on Sunday, April 24, 2005 3:08 PM
HELP NEEDED!!! [xx(]

I finally got some new wood bridges....but I don't know how to mount the trestle bents in the ground. We were thinking of dipping the ends in tar and then placing the bents in a hole of pea gravel.
would this work[?] or should i use another method[?]



Any help would really be appreciated

Chompers [:p]
The P.C.&.M.R.R SA#14

Search the Community

FREE EMAIL NEWSLETTER

Get the Garden Railways newsletter delivered to your inbox twice a month

By signing up you may also receive occasional reader surveys and special offers from Garden Railways magazine. Please view our privacy policy