Open an Older LGB 2020 loco?

[Anonymous]

Can anyone give me a tip on how to get inside an older LGB 2020 loco? I have removed every screw I can find and there seems to be something holding the top to the bottom in the middle of the engine.

Thanks.- jim

[Anonymous]

Jim,you can try here
http://217.160.206.33/produkt.nsf/psuchee
Anything to do with LGB can be a pain.Sometimes after the screws are removed ,a horizontal push is required (orsometimes a hammer)
Don't expect too much help from LGB regarding instructions.
Good luck

[Anonymous]

Thanks for the link railroadingman I'll check it.

[Anonymous]

There's information here: http://www.wintaylor.f2s.com/lgb/stainz.php about fitting a decoder to the latest type of Stainz, not sure how much has changed over the years (the loco first appeared in the '60s!), but it might be of use.

[Anonymous]

Thanks Matt - I figured it out, the gear box drops out the bottom ( a couple of detail pieces were preventing this before) then the cab is held with a screw from the bottom.
Now I wonder if I can get it back together.

Jim